100% PASS RATE Fortinet Network Security Expert FCP_FWF_AD-7.4 Certified Exam DUMP with 169 Questions
Updates For the Latest FCP_FWF_AD-7.4 Free Exam Study Guide!
Fortinet FCP_FWF_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 87
What could be a potential solution in a high-density environment where clients face slow speeds and frequent disconnects?
Response:
- A. Decreasing the DHCP lease time
- B. Reducing the AP transmit power
- C. Increasing the number of SSIDs
- D. Enabling more security protocols
Answer: B
NEW QUESTION # 88
Which feature allows for the logical segregation of a wireless network without the need for multiple physical networks?
Response:
- A. FortiGate guest management
- B. Advanced bridge mode options
- C. VLANs on SSIDs
- D. FortiAP load balancing
Answer: C
NEW QUESTION # 89
Which feature should be used to optimize client distribution across multiple access points in a high-density environment?
Response:
- A. FortiAP and client load balancing
- B. Advanced bridge mode options
- C. SSID hiding
- D. VLAN configurations on SSIDs
Answer: A
NEW QUESTION # 90
What is the primary purpose of configuring FortiAP profiles on a FortiGate wireless controller?
Response:
- A. To manage guest accounts on the network
- B. To deploy advanced wireless settings to FortiAP devices
- C. To configure VLANs on SSIDs
- D. To monitor real-time traffic on FortiAP devices
Answer: B
NEW QUESTION # 91
To ensure that traffic from different wireless clients is efficiently balanced among several access points in a high-density environment, you would primarily:
Response:
- A. Configure VLANs on each SSID.
- B. Use the FortiGate guest management feature.
- C. Configure FortiAP and client load balancing.
- D. Enable advanced bridge mode.
Answer: C
NEW QUESTION # 92
Which two roles does FortiPresence analytics assist in generating presence reports?
(Choose two.)
Response:
- A. Comparing current data with historical records
- B. Gathering details about on site visitors
- C. Reporting potential threats by guests on site
- D. Predicting the number of guest users visiting on-site
Answer: A,B
NEW QUESTION # 93
Which wireless security measures can be configured on FortiGate to protect against unauthorized access?
(Select all that apply)
Response:
- A. Load balancing
- B. Rogue AP scanning
- C. SSID hiding
- D. WPA3 encryption
Answer: B,C,D
NEW QUESTION # 94
Two APs are located in a shop that is required to support forty 2.4 GHz point-of-sale wireless devices. The APs are managed by a centrally hosted FortiGate. A previous wireless network administrator has enabled client load balancing between APs.
However, the clients are not balancing well between the APs, causing overloading on one of the AP radios. Refer to the exhibit, which is part of the configuration of the AP profile that is used for the APs.
The first AP has 35 clients associated with it, the second has five clients associated with it. The detected noise floor of the network is -91dBm. The channel utilization for both 2.4 GHZ interfaces is less than 40%. The clients have a detected signal strength of between -53 and -71 dBm. Which configuration change would improve the distribution of wireless clients between the APs? Response:
- A. Decrease the handoff-rssi option to 20.
- B. Manually configure 2.4GHz interfaces of both APs to separate channels.
- C. Increase the handoff-sta-thresh option to 20.
- D. Set the max-clients option to 20.
Answer: A
NEW QUESTION # 95
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?
Response:
- A. Wireless network security must be set to open
- B. DTLS encryption on wireless traffic must be turned off
- C. Two wireless APs must be sending data
- D. SQL services must be running
Answer: D
NEW QUESTION # 96
FortiAP profiles primarily allow you to:
Response:
- A. Monitor real-time traffic on FortiAP devices.
- B. Provision guest accounts on FortiAP devices.
- C. Deploy advanced wireless settings to FortiAP devices.
- D. Configure VLANs on SSIDs.
Answer: C
NEW QUESTION # 97
Advanced bridge mode options on FortiAP devices allow for direct communication between wireless and wired networks.
Response:
- A. False
- B. True
Answer: B
NEW QUESTION # 98
Which two statements are true about AP profiles?
(Choose two.)
Response:
- A. A profile must be applied manually to an AP before it can be managed by FortiGate.
- B. AP profiles are model specific.
- C. An AP must be authorized before having a profile applied.
- D. A FortiAP profile must be applied to a FortiAP group.
Answer: B,C
NEW QUESTION # 99
Which wireless monitoring metric is required to optimize a wireless network?
- A. Users count on the network
- B. Wireless channel utilization
- C. FortiAP running firmware status
- D. Amount of event togs generated
Answer: B
NEW QUESTION # 100
Why is capturing and analyzing AP-to-controller traffic essential?
Response:
- A. Troubleshooting potential connectivity or performance issues
- B. Identifying any RF interference
- C. Determining client browsing history
- D. Monitoring the number of connected client devices
Answer: A
NEW QUESTION # 101
The purpose of FortiAP and client load balancing is to:
Response:
- A. Optimize wireless client distribution across multiple access points.
- B. Encrypt traffic between FortiAP and FortiGate.
- C. Minimize the cost of FortiAP deployment.
- D. Provide guest access to the network.
Answer: A
NEW QUESTION # 102
What actions can be taken using WIDS profiles in FortiGate?
(Select all that apply)
Response:
- A. Suppressing unauthorized access points
- B. Managing SSID broadcast settings
- C. Enhancing wireless signal strength
- D. Detecting rogue APs
Answer: A,D
NEW QUESTION # 103
Which features can be utilized for improved client distribution and efficient bandwidth usage?
Response:
- A. FortiGate guest management
- B. Advanced bridge mode options
- C. FortiAP load balancing
- D. VLAN load-balancing
Answer: C,D
NEW QUESTION # 104
What configurations can be applied through FortiAP profiles to manage FortiAP devices?
(Select all that apply)
Response:
- A. Advanced wireless settings
- B. VLAN configurations
- C. SSID hiding
- D. Client load balancing
Answer: A,B,D
NEW QUESTION # 105
Refer to the exhibit.
An administrator authorizes two FortiAP devices connected to this wireless controller However, one FortiAP is not able to broadcast the SSIDs. What must the administrator do to fix the issue?
- A. Replace the FortiAP device model to match the other device
- B. Assign the FAP231F FortiAP profile to the problematic FortiAP device
- C. Disable the override setting on the FortiAP that is preventing it from broadcasting SSIDs
- D. Enable the radios on the FAP23JF FortiAP profile.
Answer: D
NEW QUESTION # 106
Refer to the exhibit.
User1 is part of the infrastructure department and connects to the ONBOARD wireless network using the credentials uteri. However, the dynamic VLAN assignment is not working Which configuration step must you take to fix this issue?
- A. Disable the DHCP server on ONBOARD to allow VLAN assignment.
- B. Update user1 RADIUS attributes to include a VLAN ID attribute ID
- C. Add user1 in one of the VLAN names
- D. Create a new VLAN name infrastructure' with a VLAN ID associated with it
Answer: B
NEW QUESTION # 107
Which two statements about a VAP configured for 802.1x Local Authentication are true?
(Choose two.)
Response:
- A. FortiGate operates as authentication server only.
- B. Authenticates users created locally or on a remote LDAP server.
- C. Supports the use of PEAP EAP type only.
- D. Can support the use of a self-sighed or publicly signed certificate for server authentication.
Answer: C,D
NEW QUESTION # 108
Refer to the exhibit.
Which statement is correct about channels 52 through 144 in the 5 GHz band?
- A. The channels cannot be used because of regulatory channel restrictions
- B. The channels will be scanned by the wireless intrusion detection system (WIDS)
- C. The channels are subject to dynamic frequency selection (DPS) regulations
- D. The channels can be used only when Radio Resource Provisioning is enabled
Answer: A
NEW QUESTION # 109
What is a common method used to scan for rogue APs?
Response:
- A. Checking the uplink speed of all devices.
- B. Evaluating the DHCP server logs.
- C. Analyzing Ethernet traffic for suspicious patterns.
- D. Monitoring wireless channels and spectrum.
Answer: D
NEW QUESTION # 110
Which features can be configured to improve the performance of wireless networks using FortiGate?
(Select all that apply)
Response:
- A. SSID broadcast frequency adjustment
- B. Advanced bridge mode options
- C. FortiAP and client load balancing
- D. VLAN load-balancing
Answer: B,C,D
NEW QUESTION # 111
Which option is used to configure connection rules between the wireless and wired network on a FortiAP device?
Response:
- A. FortiGate guest management
- B. Advanced bridge mode options
- C. VLAN configurations
- D. FortiAP load balancing
Answer: B
NEW QUESTION # 112
......
Best FCP_FWF_AD-7.4 Exam Preparation Material with New Dumps Questions https://www.vcetorrent.com/FCP_FWF_AD-7.4-valid-vce-torrent.html
Fast Exam Updates FCP_FWF_AD-7.4 dumps with PDF Test Engine Practice https://drive.google.com/open?id=1NAFaESPAhIk_7kA2wbuenUwftGibXik6