2025 New MB-820 Dumps - Real Microsoft Exam Questions [Q14-Q30]

2025 New MB-820 Dumps - Real Microsoft Exam Questions

Dependable MB-820 Exam Dumps to Become Microsoft Certified

NEW QUESTION # 14
You develop a table named Contoso Setup and a page.
You plan to use No. Series to automatically assign a unique number to data entries. You set up No. Series on the Vendor Nos. field of the Contoso Setup table.
You need to apply the No. Series Design Pattern to the trigger Onlnsert().
Which four code segments should you use to develop the solution? To answer, move the appropriate code segments from the list of code segments to the answer area and arrange them in the correct order.

Answer:

Explanation:

Explanation:
To properly apply the No. Series Design Pattern in the OnInsert() trigger, the correct sequence of actions should be as follows:
* ContosoSetup.Get();
* First, retrieve the Contoso Setup record using the Get method. This ensures that the necessary setup information is available, including the No. Series.
* if "No." = '' then begin
* Next, check if the No. field is empty. If it is, a new number from the No. Series should be assigned.
* NoSeriesManagement.InitSeries(ContosoSetup."Vendor Nos.", "No. Series", 0D, "No.", "No.
Series");
* Call the InitSeries function to assign a new number from the No. Series. This initializes the No.
Series for the Vendor Nos. field.
* ContosoSetup.TestField("Vendor Nos.");
* Lastly, ensure that the Vendor Nos. field is populated and valid by calling TestField.
Correct Order for Code Segments:
* ContosoSetup.Get();
* if "No." = '' then begin
* NoSeriesManagement.InitSeries(ContosoSetup."Vendor Nos.", "No. Series", 0D, "No.", "No.
Series");
* ContosoSetup.TestField("Vendor Nos.");

NEW QUESTION # 15
You need to create the code related to the Subcontract Documents table to meet the requirement for the quality department.
How should you complete the code segment? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 16
You need to define the data types for the fields of the N on-conformity table.
Which two data types should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Integer for the N on-conformity Number field
B. Char for the Non-Conformity Number field
C. Date Time for the Non-Conformity Date field
D. Code for the Non-Conformity Number field
E. Date for the Non-Conformity Date field

Answer: D,E

NEW QUESTION # 17
You create a codeunit that works with a table named Boxes. You plan to filter the records and then modify them.
You get an error that you do not have permission to work with the Boxes table.
You need to assign the Indirect permissions for the Boxes table to the codeunit.
Which four code blocks should you use in sequence to assign the correct permission? To answer, move the appropriate code blocks from the list of code blocks to the answer area and arrange them in the correct order.

Answer:

Explanation:

Explanation:
To assign the indirect permissions for the Boxes table to the codeunit, use the following code blocks in sequence:
* TableData
* "Boxes" =
* Permissions
* RIM
Assigning permissions:In Business Central, to assign permissions within a codeunit, you need to specify the table that the permissions apply to, followed by the type of permission. The sequence starts by indicating that we are defining table data permissions (TableData). Then, we specify the table in question ("Boxes" =).
After that, we state that we are setting permissions (Permissions). Finally, we assign the RIM permissions, which stands for Read, Insert, and Modify permissions. The Indirect permission allows the codeunit to read, insert, and modify records in the Boxes table indirectly, meaning these operations can be performed by the codeunit when it is called by a user who has direct permissions for these operations.

NEW QUESTION # 18
A company uses Azure Application Insights for Business Central online in its production environment.
A user observes that some job queues go into the failed state and require manual intervention.
You need to analyze job queue lifecycle telemetry.
How should you complete the code segment? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 19
You need to define the data types for the fields of the N on-conformity table.
Which two data types should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Char for the Non-Conformity Number field
B. Integer for the N on-conformity Number field
C. Date Time for the Non-Conformity Date field
D. Code for the Non-Conformity Number field
E. Date for the Non-Conformity Date field

Answer: A,D

Explanation:
In Business Central, fields in tables are assigned specific data types that determine the kind of data they can store. For the Non-conformity table mentioned in the case study, the following data types should be used:
* Date for the Non-Conformity Date field: This is because the Non-conformity Date field is required to store only the date when the non-conformity was recorded. The Date data type is appropriate for storing dates without times.
* Code for the Non-Conformity Number field: The Non-conformity Number field is described to use alphanumeric values with a format that includes "NC" and the year, like "NC24-001". In Business Central, the Code data type is used for fields that store alphanumeric keys. It is a text field with a limited length, which makes it suitable for number series that contain letters and numbers.
Other options are not suitable:
* A. Integer for the Non-conformity Number field: This would not be appropriate because the Non- conformity Number includes alphanumeric characters and not just integers.
* B. DateTime for the Non-Conformity Date field: This is not correct because there is no requirement to store the time alongside the date.
* C. Char for the Non-Conformity Number field: Char data type is not typically used in Business Central for number series or identifiers. The Code data type is preferred for this purpose.
Topic 2, Contoso, Ltd. Contoso, Ltd. Is a sales company in the
manufacturing industry. It has subsidiaries in multiple countries
/regions, each with its own localization. The subsidiaries must be
data-independent from each other. Contoso. Ltd. uses an external
business partner to manage the subcontracting of some
manufacturing items. Contoso. Ltd. has different sectors with data
security between sectors required.
Contoso, Ltd. uses Business Central online as the main ERP for financial. sales, purchase, warehouse, and manufacturing processes. It has employees that use the Business Central web application and external applications. The company has a custom external mobile app under development The IT department and its partners installed custom extensions to satisfy the company's requirements where the functionality is not available natively.
Contoso. Ltd. interacts with external services provided by customers and partners. Different applications interact with SOAP and OData endpoints exposed from Business Central.
An external business partner of Contoso, Ltd exposed a REST API for receiving details about new subcontracting orders and for sending the planned release date of each subcontracting order received.
Contoso. Ltd. has not activated the monitoring of the tenant and has no internal telemetry for its apps.
Custom reporting must be created to meet the requirements of the different departments.
Contoso, Ltd. has the following tenant management considerations:
IT department
* The IT department requires the ability to monitor the tenant to prevent performance problems and detect possible anomalies.
* The IT department plans to use Azure Application Insights and Log Analytics to inspect the ingested telemetry signals.
* All tenant upgrades are automatically handled by Microsoft. The IT department does not check for update availability or for tenant-related notifications.
* The IT department has not configured the receipt of tenant-related notifications from the Business Central admin center.
External business partner
* The external business partner must add custom telemetry to an application created for Contoso. Ltd. to monitor a business process.
* Custom telemetry signals for the application must be visible only on the partner's telemetry.
SOAP
* Contoso, Ltd. plans to dismiss using the SOAP protocol for integrations.
* Contoso, Ltd. must be able to detect if external applications are using its Business Central SOAP endpoints.
Issue
The Business Central tenant is upgraded by Microsoft to a new major version during the night.
Users report that one of the Contoso. ltd. extensions disappeared from the tenant The IT department confirms that the extension is still published.
Contoso. Ltd. plans to create a custom mobile application that has the following requirements:
* The app must be used by employees to check item details from the ERP in real time and to report issues that occur during the manufacturing process.
* An AL extension must be created for handling archived issues.
* Business Central development guidelines must be followed when implementing modules.
* A module must be implemented for the reporting and tracking of issues information. You plan to call this module Issue Management The module must expose a method nan Postlude.
* Code modifications will be required over time.
* The Issue Management process must be split into two extensions:
o ISSUE BASE: main extension
o ISSUE EXT: second extension with dependency from ISSUE BASE
* In the version 1.0.0.0 of the ISSUE BASE extension, you plan to create an Issue table that contains a global Decimal variable named Issue Total.
* In the version 1.0.0.0 of the ISSUE BASE extension, you plan to define a table named Issue Category with a Description field defined as follows:
field (2; Description; Text[SG])
{
DataClassificstion * CustoaerContent;
>
* The Issue table defined in ISSUE BASE extension contains a Clone procedure defined as follows:
procedure Corte () begin end;
* In the ISSUE EXT extension, you create a table extension object of the Issue table.
* The table extension object of the Issue table must access the Issue Total: Decimal variable.
After weeks of usage, you discover that you must remove the Description field and the Clone procedure because they are no longer required.
In a new version of the ISSUE BASE extension, you create a new Issue Type table. You must move data row by row from a previously obsolete Issue Category table to the new Issue Type table. Because a large amount of data must be moved, you must write an Upgrade codeunit by using the DataTransfer object.
The IT department creates a custom API for exposing the custom Issue table. The API provides an action for copying an issue to a new table. The action is defined as follows:
(Service Enabled]
procedure Copy (vary action Context: WebServiceActionContext)
begin
end;
Contoso, Ltd. must create an API in Business Central to expose item details to the mobile application.
* The API must have the lowest possible impact on the production environment when used during working hours.
* The API must only support Get operations.
A user of the ISSUE BASE extension in Business Central reports a problem.
To debug the problem, snapshot debugging with the following configuration was activated:

You discover that the debugging is not triggering.
Contoso, Ltd. must connect Business Central to the external API provided by the business partner. This will be used for the partner to send the details of new subcontracting orders to fulfill the sales demand, and for receiving the planned release date of each order sent. The integration requirements are as follows:
* The business partner will provide a REST API secured with basic authentication. Credentials to access the API will be shared with Contoso, ltd.
* The API for sending subcontracting orders must be called by sending an authenticated POST request to the given endpoint.
* The API for retrieving the order no. and planned release date of each subcontracting order responds with the following JSON:

Each order no. must be retrieved.

NEW QUESTION # 20
A company plans to deploy Business Central.
The company has the following deployment requirements:
* Use the company hardware architecture to run the deployment.
* Use sandbox environments to develop extensions.
* Allow tenants to connect to Shopify with the standard connector.
* Use Microsoft Power Automate to create a workflow that calls a business event.
You need to identify the deployment type for each requirement.
Which deployment types should you use? To answer, move the appropriate deployment types to the correct requirements. You may use each deployment type once, more than once, or not at all.

Answer:

Explanation:

Explanation:
* Use the company hardware architecture to run the deployment: On-premises
* Use sandbox environments to develop extensions: Online
* Allow tenants to connect to Shopify with the standard connector: Online
* Use Microsoft Power Automate to create a workflow that calls a business event: Online When deploying Microsoft Dynamics 365 Business Central, there are two main deployment types to consider:
On-premises and Online.
* On-premises Deployment:
* The requirement to use the company's hardware architecture implies a need for an on-premises deployment. This is because on-premises deployment allows for the application to be installed and run directly from the company's in-house servers and computing infrastructure, giving full control over the environment and data.
* Online Deployment:
* The use of sandbox environments for developing extensions is a feature provided in the online version of Business Central. Sandbox environments are a part of the service offered in the cloud- based version, which allows developers to test and develop without affecting the live environment.
* Connection to Shopify with the standard connector implies an online deployment. The standard connector is typically a cloud-based service that allows Business Central to connect with other cloud platforms like Shopify, which is more seamlessly integrated with the online version.
* Lastly, the use of Microsoft Power Automate to create a workflow that calls a business event suggests an online deployment. Power Automate is a cloud-based service designed to create automated workflows between applications and services - which aligns with the services provided by the online version of Business Central.
Therefore, each requirement aligns with the deployment types as indicated above.

NEW QUESTION # 21
You have an XMLport that exports items from a database to an XML file.
You need to change the export format from XML to CSV.
What should you do?

A. Change the FormatEvaluate property to Legacy.
B. Fill the FileName property with the Items.csv value.
C. Change the XmlVeisionNo property to 1.1.
D. Change the Direction property to Both
E. Change the Format property to VariableText.

Answer: E

Explanation:
XMLport OverviewIn Microsoft Dynamics 365 Business Central, XMLports are used for importing and exporting data in XML, CSV, or other text formats. By default, XMLports are designed to work with XML data, but they can also handle delimited text formats like CSV (Comma-Separated Values).
Requirement ClarificationThe requirement is to change the export format from XML to CSV. CSV is a text- based format, not an XML format. To accommodate this, you need to change how the XMLport handles data during export.
Properties of XMLport
* The Format property in XMLports controls whether the output format is XML or a text-based format such as CSV.
* The VariableText option of the Format property specifies that the data should be exported in a variable text format, like CSV.
* The XMLports default to an XML format, but by setting the Format property to VariableText, you can change the export to CSV format or another text-delimited format.
Explanation of Correct Answer (E)To switch from XML to CSV export:
* You need to change the Format property of the XMLport to VariableText.
* The VariableText option allows for the export of data in a non-XML format, which is precisely what CSV represents (a comma-delimited text file).
Why Other Options Are Incorrect
* Option A (Change the Direction property to Both):The Direction property controls whether the XMLport is used for Import, Export, or Both (import and export), but it does not affect the file format (XML vs. CSV). Hence, this is irrelevant to the file format change.
* Option B (Change the FormatEvaluate property to Legacy):The FormatEvaluate property is not related to changing the export format. It deals with the evaluation of the data format during the processing but doesn't change the format type (XML or CSV).
* Option C (Change the XmlVeisionNo property to 1.1):The XmlVersionNo property defines the XML version used for the export (such as 1.0 or 1.1). This only applies to XML exports and does not change the format to CSV.
* Option D (Fill the FileName property with Items.csv):While this option would specify the name of the file being exported (i.e., "Items.csv"), it doesn't control the format of the export itself. The actual format change is controlled by the Format property.
Developer Reference from Microsoft DocumentationAccording to the official Microsoft documentation for XMLports in Business Central, the Format property is critical for determining how data is structured for export. To change the file format from XML to CSV, developers need to set the Format property to VariableText. This allows for export in a text-delimited format, which is ideal for CSV.
* XMLport Properties - Format Property
* How to: Export Data in Text Format Using XMLports

NEW QUESTION # 22
A company plans to customize its per tenant extension reports. The company has the following requirements for the customization:
* Child data items must not be displayed on the request page for some master detail reports.
* Selecting key filter fields takes users too much time. The customization must decrease the amount of time to select the fields.
You need to optimize the report request page.
Which actions should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
For the given requirements, you should configure the following actions:
* For child data items not to be displayed on the request page for some master-detail reports, set the DataItemLinkReference property to the parent data item.
* To decrease the amount of time to select key filter fields, specify the RequestFilterHeading property.
In Dynamics 365 Business Central, when customizing report request pages, certain properties can be set to control the behavior and display of the report options:
* Hiding Child Data Items:The DataItemLinkReference property is used to link a child data item to a parent data item in the data model of a report. Setting this property correctly will ensure that the child data items are related to the correct parent data item and will be displayed or hidden accordingly on the request page. If the goal is to prevent child data items from being displayed, you need to make sure they are correctly linked and configured to not appear.
* Optimizing Filter Field Selection:The RequestFilterHeading property is used to group filter fields on the request page. By specifying this property, you can create a more organized and user-friendly interface, which can significantly speed up the process of selecting filters. This property allows you to categorize filters into headings, making it quicker and easier for users to find and set the necessary filters for the report.
By adjusting these properties on the report request page as part of the per tenant extension customization, you will address the company's requirements to optimize the user experience when running reports.

NEW QUESTION # 23
You have the following XML file sample for the Items list:

You plan to create the next XML file by using an XMLport object.
You need to complete the code segment to export the file in the required format How should you complete the code segment? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION # 24
A company has a page named New Job Status connected to a source table named Job. The page has an action named Item Ledger Entries. The company requires the following changes to the page:
* Filter the page to display only jobs with open or quote status.
* Add the following comment for internal use: This page does not include completed jobs.
* Item Ledger Entries action must open the selected job on the page and display it in the Ul for users to modify.
You need to select the property selections to use for each requirement.
Which property selections should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:

NEW QUESTION # 25
A company plans to import and export data with Business Central
You must configure an XMLport that provides the following implementation;
* Specifies import 01 export on the Request page at run time
* Formats the data in a non-fixed length CSV format
You need to create the XMLport.
How should you complete the code segment' To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
Direction: Both
Format: VariableText
You are configuring an XMLport for Business Central with the following requirements:
* Specifies import or export on the Request page at runtime.
* Formats the data in a non-fixed length CSV format.
XMLport Configuration:
* Specifies import or export on the Request page at runtime.The Direction property must be set to Both.
* This allows the XMLport to both import and export data depending on user selection during runtime.
* Formats the data in a non-fixed length CSV format.The Format property must be set to VariableText.
* VariableText is used for delimited text formats like CSV, which do not have a fixed length for fields.

NEW QUESTION # 26
A company has a Business Central online environment.
You are exporting a file from a client by using the DownloadFromStream method.
You need to create an InStream data type to send the data.
Which solution should you use?

A. Use CreateInStream method for File type variable.
B. Use CreateInStream method from codeunit "Temp Blob".
C. Use CreateInStream method for BLOB field of "TempBlob" table.

Answer: B

Explanation:
By using the CreateInStream method on a Temp Blob, you create an InStream that can then be used with the DownloadFromStream method to send the file data to the client.

NEW QUESTION # 27
A company is setting up a sandbox environment.
You observe the following issues in Visual Studio Code:
* When you open the User Settings window, no AL command is available
* In the Problems tab. the error 'The target page Customer List for the extension object is not found' is displayed.
You need to identify a solution for each issue.
Which solutions should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
No AL command in User Settings:The correct solution is to Install the AL Language extension.
* This issue arises when the AL Language extension is not installed in Visual Studio Code, which is required to work with AL projects in Business Central.
Error in the Problems tab:The correct solution is to Download Symbols.
* This error typically occurs when the symbols (metadata for pages, tables, etc.) are not downloaded, and Visual Studio Code cannot resolve the reference to the Customer List page. Downloading symbols should fix the problem.

NEW QUESTION # 28
Case Study 1 - Contoso, Ltd
Background
Contoso, Ltd. is a sales company in the manufacturing industry. It has subsidiaries in multiple countries/regions, each with its own localization. The subsidiaries must be data-independent from each other. Contoso. Ltd. uses an external business partner to manage the subcontracting of some manufacturing items. Contoso, Ltd. has different sectors with data security between sectors required.
Current environment
Contoso, Ltd. uses Business Central online as the main ERP for financials, sales, purchase, warehouse, and manufacturing processes. It has employees that use the Business Central web application and external applications. The company has a custom external mobile app under development.
The IT department and its partners installed custom extensions to satisfy the company's requirements where the functionality is not available natively.
Contoso, Ltd. interacts with external services provided by customers and partners. Different applications interact with SOAP and OData endpoints exposed from Business Central.
An external business partner of Contoso, Ltd. exposed a REST API for receiving details about new subcontracting orders and for sending the planned release date of each subcontracting order received.
Contoso, Ltd. has not activated the monitoring of the tenant and has no internal telemetry for its apps.
Custom reporting must be created to meet the requirements of the different departments.
Tenant management
Contoso, Ltd. has the following tenant management considerations:
IT department
The IT department requires the ability to monitor the tenant to prevent performance problems and detect possible anomalies.
The IT department plans to use Azure Application Insights and Log Analytics to inspect the ingested telemetry signals.
All tenant upgrades are automatically handled by Microsoft. The IT department does not check for update availability or for tenant-related notifications.
The IT department has not configured the receipt of tenant-related notifications from the Business Central admin center.
External business partner
The external business partner must add custom telemetry to an application created for Contoso, Ltd. to monitor a business process.
Custom telemetry signals for the application must be visible only on the partner's telemetry.
SOAP
Contoso, Ltd. plans to dismiss using the SOAP protocol for integrations.
Contoso, Ltd. must be able to detect if external applications are using its Business Central SOAP endpoints.
Issue
The Business Central tenant is upgraded by Microsoft to a new major version during the night.
Users report that one of the Contoso, Ltd. extensions disappeared from the tenant. The IT department confirms that the extension is still published.
Custom mobile application requirements
Contoso, Ltd. plans to create a custom mobile application that has the following requirements:
The app must be used by employees to check item details from the ERP in real time and to report issues that occur during the manufacturing process.
An AL extension must be created for handling archived issues.
Business Central development guidelines must be followed when implementing modules.
A module must be implemented for the reporting and tracking of issues information. You plan to call this module Issue Management. The module must expose a method named PostIssue.
Code modifications will be required over time.
The Issue Management process must be split into two extensions:
ISSUE BASE: main extension
ISSUE EXT: second extension with dependency from ISSUE BASE
In the version 1.0.0.0 of the ISSUE BASE extension, you plan to create an Issue table that contains a global Decimal variable named IssueTotal.
In the version 1.0.0.0 of the ISSUE BASE extension, you plan to define a table named Issue Category with a Description field defined as follows:

The Issue table defined in ISSUE BASE extension contains a Clone procedure defined as follows:

In the ISSUE EXT extension, you create a tableextension object of the Issue table.
The tableextension object of the Issue table must access the IssueTotal: Decimal variable.
After weeks of usage, you discover that you must remove the Description field and the Clone procedure because they are no longer required.
In a new version of the ISSUE BASE extension, you create a new Issue Type table. You must move data row by row from a previously obsolete Issue Category table to the new Issue Type table. Because a large amount of data must be moved, you must write an Upgrade codeunit by using the DataTransfer object.
The IT department creates a custom API for exposing the custom Issue table. The API provides an action for copying an issue to a new table. The action is defined as follows:

Contoso, Ltd. must create an API in Business Central to expose item details to the mobile application.
The API must have the lowest possible impact on the production environment when used during working hours.
The API must only support Get operations.
Debugging problems
A user of the ISSUE BASE extension in Business Central reports a problem.
To debug the problem, snapshot debugging with the following configuration was activated:

You discover that the debugging is not triggering.
Integration with business partner for subcontracting
Contoso, Ltd. must connect Business Central to the external API provided by the business partner. This will be used for the partner to send the details of new subcontracting orders to fulfill the sales demand, and for receiving the planned release date of each order sent. The integration requirements are as follows:
The business partner will provide a REST API secured with basic authentication. Credentials to access the API will be shared with Contoso, Ltd.
The API for sending subcontracting orders must be called by sending an authenticated POST request to the given endpoint.
The API for retrieving the order no. and planned release date of each subcontracting order responds with the following JSON:

Each order no. must be retrieved.

A. The "executionContext" parameter is not set to "Debug".
B. The "breakOnNext" parameter is not set to "WebServiceClient".
C. The "userId" parameter is specified, and the next user session that is specified in the
"breakOnNext" parameter is snapshot debugged.
D. The "userId" parameter must have the GUID of the user specified, not the username.

Answer: D

Explanation:
In Microsoft Dynamics 365 Business Central, when configuring snapshot debugging, it is crucial that the parameters in the configuration file are correctly set. From the options provided, the issue with the debugger not starting correctly is most likely due to an incorrect "userId" parameter.

NEW QUESTION # 29
You plan to create a table to hold client data.
You have the following data integrity requirements:
* Lookups into other records must be established.
* Validate if a record exists in a destination record.
You need to select the table field property to use for each requirement.
Which table field property should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION # 30
......

Get Ready with MB-820 Exam Dumps (2025): https://www.vcetorrent.com/MB-820-valid-vce-torrent.html

Realistic MB-820 Dumps are Available for Instant Access: https://drive.google.com/open?id=1-EFE8tszSFi9iYoduOAasn-FDCJzN8E3

2025 New MB-820 Dumps - Real Microsoft Exam Questions [Q14-Q30]

Related Articles

Contact Us