Latest [Dec 28, 2021] CTAL-TA_Syll2019 Exam with Accurate ISTQB Certified Tester Advanced Level - Test Analyst (Syllabus 2019) PDF Questions
Take a Leap Forward in Your Career by Earning ISQI 41 Questions
ISQI CTAL-TA_Syll2019 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 24
Which of the following descriptions is an example of the use of defect taxonomies?
- A. Following a defect management process throughout testing
- B. Using a list of known defect types to penetrate the security of computer systems
- C. Running tests with the aim of finding as many defects as possible
- D. Grouping defects found during execution by functional area
Answer: B
NEW QUESTION 25
company in the medical domain has adopted methodical testing as its preferred test strategy Before being able to release to the market an external audit on the test process is mandatory. The test team consists of a mix of highly experienced domain-based testers and junior testers who only recently joined the company.
What is the BEST option regarding the level of detail and documentation required for test cases in the project?
- A. Low-level test cases since this will support both the external audit and the new junior testers.
- B. High-level test cases since this is consistent with the chosen test strategy
- C. Low-level test cases since it will make the process more effective and it will make the best use of the knowledge and skills of the experienced domain testers.
- D. High-level test cases since it will make the process more effective and it will make the best use of the knowledge and skills of the experienced Idomain testers.
Answer: D
NEW QUESTION 26
Which of the following is an appropriate task for the Test Analyst to perform during the test execution phase?
- A. Analysing anomalies to establish their likely causes
- B. Creating automated tests
- C. Finalizing test data and test environments
- D. Creating a test execution schedule
Answer: C
NEW QUESTION 27
Based on the tax system specification as described below, using boundary value analysis, which would be the best test set to explicitly test on single boundary value fully?
Tax system
A tax system needs to be updated due to new legislation. For a person with a salary of less than € 20 000 and who is married, the tax needs to be recalculated.
If a person has at least three and less than six children, an additional 10% reduction is applicable.
- A. Test set (ii)
- B. Test set (iii)
- C. Test set (iv)
- D. Test set (i)
Answer: B
NEW QUESTION 28
How many cases are required to test the tax system specification as described below, using a decision table which is not collapsed?
Tax system
A tax system needs to be updated due to new legislation. For a person with a salary of less than € 20.000 and who is married, the tax needs to be recalculated. If the person also has more than two and less than five children, an additional 10% reduction is applicable.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 29
To enhance both the effectiveness and efficiency of the test design phase, the purchase of a test design tool is being considered. Which one of these statements best characterizes a test design tool?
- A. A test design tool generates test inputs from requirements
- B. A test design tool validates models of the software.
- C. A test design tool enables individual tests to be traced to requirements
- D. A test design tool enables tests to be executed automatic ally.
Answer: B
NEW QUESTION 30
Consider the following requirement:
The system shall allow cash advances of at least 200 Euros for all supported credit cards The following credit cards are supported- American Express, Diners, VISA, Mastercard and Eurocard.
The requirement has been identified as business critical.
The following test conditions have been derived:
1. The system shall allow cash advances of at least 200 Euros
2. It shall support American Express, Diners, VISA, Mastercard and Eurocard.
Assume you are following a risk-based testing strategy, where likelihood and impact are both assessed on a five-point scale ranging from very low to very high The requirement R1 was identified as a risk item during the quality risk analysis process. In total 20 risk items were identified during thisprocess Assume that technical project stakeholders have assessed the likelihood of the requirementR1 risk item at a medium levelGiven only the information above, which of the following statements is true?
- A. The test cases associated with requirement R1 must be run towards the middle of the test execution period.
- B. A large number of test cases should be designed for requirement R1, based on impact
- C. The test cases associated with requirement R1 shall be run first in the test execution period
- D. The risk impact for requirement R1 should be categorized as high or very high
Answer: D
NEW QUESTION 31
You are testing the processing of a critical traffic control system to which various regulations apply The processing of the input variables is dependent on defined ranges within which the actual retrieved data values can lie.
Which of the following black-box test techniques should you use to test the processing functionality of this system?
- A. Pairwise testing
- B. State transition testing
- C. Use case testing
- D. Equivalence partitioning enhanced with boundary value analysis
Answer: C
NEW QUESTION 32
When preparing test cases for an interoperability test, not all interactions may be clearly specified in the requirements documents. Which type of document is typically also used by a Test Analyst as the test basis for interoperability testing?
- A. Component specifications
- B. System architecture document
- C. User stories
- D. Functional specifications
Answer: D
NEW QUESTION 33
Consider the following decision table:
This decision table has been created to test the following specification: Persons that study at a university (C1) and have parents whose total annual income is less than € 30.000 (C2), receive a scholarship In in addition to these qualifications, if they also live away from home (C3), they receive an addition to their scholarship (A2) How many cases are left when this decision table is collapsed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 34
What is the MOST important reason why test conditions should be understandable by business stakeholders?
- A. Test documentation should always be understandable by all stakeholders.
- B. They should be able to review the test conditions and provide feedback to the Test Analyst
- C. They should be able to use them as a basis for designing test cases.
- D. They should be able to use them to establish traceability to requirements
Answer: B
NEW QUESTION 35
A PIN entry component of an ATM system has been developed using the following state table:
Using the state transition test technique, how many 0-switch test cases are needed to achieve 100% 0-switch coverage?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 36
During testing of a mobile banking application, traceability matrices are defined and maintained between test cases and user stories. This task is supported by a test management tool. Testing is expected to report on the coverage level of the implemented and tested user stories. Which of the following test types is most likely being performed?
- A. Functional correctness testing
- B. Functional completeness testing
- C. Functional appropriateness testing
- D. Interoperability testing
Answer: B
NEW QUESTION 37
Based on the classification tree shown below, using the pairwise testing technique how many test cases are required to test all pairs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 38
Asa Test Analyst, you have been given a set of requirements that have been defined for the payment module of a new public transport system The set includes the following requirements:
P101 The product shall calculate the lowest fare for the destination considering day of week and time, (priority: medium) P102 The product shall compare the traveler's payment with the calculated payment (priority: high) P103 The product shall provide feedback if the payment is not sufficient (priority: high) P104 The product will process payments within 20 seconds at all priority 1 stations during peak hours (priority high) Which set of requirements will typically be tested by a Test Analyst?
- A. P101, P102, P104
- B. P102, P103, P104
- C. P101,P102, P103
- D. P101, P103, P104
Answer: C
NEW QUESTION 39
As a Test Analyst you are involved in the early stages of an acceptance test for a Product Data Management system.You are asked to write test designs and test cases based on use cases. An early version of the system is already available. It is expected that many things will change (including the user interface) during implementation of the new version.
The tests will be conducted by end-users with much domain knowledge who have also been involved in the project defining the user requirements (in the format of use cases) and reviewing other documentation.
What Is the BEST option regarding the level of detail and documentation required for test cases in the project?
- A. Detailed low-level test cases since many re-runs of the tests are expected.
- B. High-level test cases supported by low-level test cases to allow for traceability and enable future changes.
- C. Low-level test cases only since the end-users have extensive domain knowledge.
- D. High-level test cases only since the end-users have extensive domain knowledge and many changes are expected
Answer: D
NEW QUESTION 40
......
Authentic Best resources for CTAL-TA_Syll2019 Online Practice Exam: https://www.vcetorrent.com/CTAL-TA_Syll2019-valid-vce-torrent.html
Practice To CTAL-TA_Syll2019 - VCETorrent Remarkable Practice On your ISTQB Certified Tester Advanced Level - Test Analyst (Syllabus 2019) Exam: https://drive.google.com/open?id=14G67FiwKONFz7uxT52BpXJMozQA2HLn0