Latest [Mar 28, 2024] Real USGBC LEED-Green-Associate Exam Dumps Questions
LEED-Green-Associate Dumps To Pass USGBC LEED Exam in One Day (Updated 275 Questions)
NEW QUESTION # 157
Which of the following project characteristics demonstrate smart growth principles?
- A. The project consists of two adult care facilities, three senior center facilities and one nursing home
- B. The project is built on a former chemical landfill site
- C. The project protects open space and farmland by building housing and offering transportation choices near jobs, shops and schools
- D. The project consists of a sprawling new housing complex 5 mi. (8 km) from the nearest city
Answer: C
Explanation:
Smart growth principles aim to create livable, walkable, and sustainable communities that reduce sprawl, preserve natural resources, and enhance quality of life. One of the principles is to foster distinctive, attractive communities with a strong sense of place by mixing land uses, providing a range of housing opportunities and choices, creating walkable neighborhoods, and encouraging community and stakeholder collaboration in development decisions. The project that protects open space and farmland by building housing and offering transportation choices near jobs, shops and schools exemplifies this principle. Reference: LEED v4 Green Associate Candidate Handbook, Smart Growth Principles
NEW QUESTION # 158
Which of the following is an Environmental Concern when referring to Energy and Atmosphere?
- A. Resource depletion
- B. Use of native species
- C. Occupant comfort
- D. Ventilation levels
Answer: A
NEW QUESTION # 159
When considering water conservation and water efficient landscaping, which type of water would be most useful for landscape irrigation?
- A. Clean water
- B. Blackwater
- C. potable water
- D. Rainwater
Answer: D
Explanation:
Explanation
Rainwater is the type of water that would be most useful for landscape irrigation when considering water conservation and water efficient landscaping. Rainwater is water that falls from the sky as precipitation, and it can be collected and stored in tanks, barrels, cisterns, or ponds for later use1. Rainwater is a renewable and free source of water that does not require any treatment or pumping, unlike potable water, which is water that is safe for human consumption and often comes from municipal sources2. Potable water is a scarce and valuable resource that should be conserved for drinking, cooking, and hygiene purposes, rather than for irrigation2. Clean water is a vague term that can refer to any water that is free of contaminants, but it does not necessarily mean that it is potable or suitable for irrigation3. Blackwater is water that contains human or animal waste, such as sewage or toilet water, and it poses a health and environmental risk if used for irrigation without proper treatment4. Therefore, rainwater is the best option for landscape irrigation, as it reduces the demand for potable water, lowers the utility bills, and benefits the plants and soil1.
References:
Rainwater Harvesting for Landscape Irrigation
Potable Water
Clean Water
Blackwater
NEW QUESTION # 160
Which of the following is the most important phase of the integrative process?
- A. Discovery Phase
- B. Operation Phase
- C. Construction Phase
- D. Design Phase
Answer: A
Explanation:
Explanation
The discovery phase is the most important phase of the integrative process, as it sets the foundation for the rest of the project. In this phase, the project team conducts a preliminary analysis of the site, building, systems, and occupants to identify the goals, challenges, and opportunities for improving performance and sustainability.
The team also engages in an iterative process of exploring design options, evaluating trade-offs, and selecting strategies that optimize multiple benefits across different disciplines and stakeholders. The discovery phase requires a high level of collaboration and communication among the team members and with the client, as well as a holistic and systems thinking approach to problem-solving. References: LEED v4 BD+C Reference Guide, Integrative Process, page 28; LEED v4: Building Design + Construction Guide4
NEW QUESTION # 161
How is an exemplary performance point earned if the credit is available for exemplary performance per the Reference Guide?
- A. Verify that precedent has been established
- B. Meet the indicated incremental performance threshold
- C. Increase performance by 25%
- D. Submit a Project CIR
Answer: B
Explanation:
Explanation
An exemplary performance point is earned if the project achieves a performance level that is significantly higher than the credit requirements, as specified in the LEED Reference Guide1. The incremental performance threshold varies depending on the credit and is typically double the credit requirements or the next percentage threshold2.
References: 1 NC-v4.1 INc1: Innovation | LEEDuser2 What Is Exemplary Performance In LEED? | LEED Blog - Projectific, Inc.
NEW QUESTION # 162
According to LEED. which of the following should be considered when locating a site for a project?
- A. Infrastructure context
- B. Revenue generating possibilities
- C. Economic stability
- D. Political landscape
Answer: A
Explanation:
According to LEED, one of the factors that should be considered when locating a site for a project is the infrastructure context. The infrastructure context refers to the existing physical systems that support a site, such as roads, utilities, transit networks, water supply, wastewater treatment, stormwater management, and waste disposal. Choosing a site that has access to adequate infrastructure can reduce the environmental impacts of developing new infrastructure, such as land disturbance, resource consumption, energy use, emissions, and pollution. The LEED Green Associate Candidate Handbook states that one of the intents of the Location and Transportation category is to "reduce environmental harm from transportation infrastructure" [1, p. 12]. Reference: LEED Green Associate Candidate Handbook, [Location and Transportation | U.S. Green Building Council]
NEW QUESTION # 163
A company is considering investing in green power for its operations facilities, but is reluctant because of the high capital investment, maintenance costs and slow initial financial returns. Which of the following is a practical strategy to help the company overcome these obstacles?
- A. Relocate the company to a region that is better suited for harnessing renewable energy
- B. Host an on-site renewable energy generation system and agree to buy the power without owning the equipment
- C. Divert the company's research and development funds to investment in large scale hydroelectric power
- D. Hire employees to staff a new operations department in preparation for the maintenance needs of the new renewable energy equipment
Answer: B
Explanation:
Explanation
A charrette is an intensive, multi-disciplinary workshop with the aim of developing a design or vision for a project or planning activity. Charrettes are often conducted to design such things as parks and buildings, or to plan communities or transportation systems. A charrette should take place at the beginning of the project, when the design team can engage with all the stakeholders, including the client, users, consultants, contractors, regulators, and community members. A charrette at this stage can help to:
* Establish clear goals and objectives for the project
* Identify opportunities and constraints for the site and program
* Generate creative and innovative ideas and solutions
* Foster collaboration and consensus among diverse perspectives
* Reduce conflicts and delays during later phases of the project
* Enhance communication and trust among the project team
The other options are not appropriate phases for a charrette. Post commissioning is too late to influence the design or planning of the project. During the design process, somedecisions may have already been made or some stakeholders may have been excluded. During the construction process, changes may be costly or impractical to implement. References: : Charrette
NEW QUESTION # 164
Designers and builders can construct a green building that uses significantly less water than a conventional building by incorporating which opportunity?
- A. Not tracking water metering
- B. Native plant landscapes
- C. Invasive plant landscapes
- D. Use of potable water
Answer: B
Explanation:
Explanation
Designers and builders can construct a green building that uses significantly less water than a conventional building by incorporating native plant landscapes. Native plant landscapes are plants that are adapted to the local climate and soil conditions, and require little or no irrigation, fertilization, or pesticides. They also provide habitat for wildlife, reduce stormwater runoff, and enhance the aesthetic value of the site. The LEED Green Associate Candidate Handbook states that one of the intents of the Sustainable Sites category is to
"conserve water by using native or adapted plants" [1, p. 13]. References: [LEED Green Associate Candidate Handbook], [Native Plants | U.S. Environmental Protection Agency]
NEW QUESTION # 165
Which of the following is the reason Regional Priority credits are awarded?
- A. To promote innovation in building design
- B. To address local environmental issues
- C. To help meet economic goals
- D. To encourage exemplary performance
Answer: B
Explanation:
Regional Priority credits are awarded to encourage projects to address local environmental issues that are of particular importance or concern for the region where the project is located. These issues may include water scarcity, air quality, habitat protection, or human health. Regional Priority credits are not new LEED credits, but rather existing credits that have been identified by regional councils or chapters of USGBC as having higher priority or relevance for their areas. Projects can earn up to four bonus points by achieving Regional Priority credits. Reference: LEED v4 BD+C Reference Guide, Introduction, page 13; LEED v4 Impact Category and Point Allocation Process Overview1
NEW QUESTION # 166
Light colored paving and cool roofs are terms referring to materials with
- A. higher emissivity and lower albedo
- B. lower emissivity and lower albedo
- C. higher emissivity and higher albedo
- D. lower emissivity and higher albedo
Answer: C
Explanation:
Explanation
Light-colored paving and cool roofs refer to materials with higher emissivity and higher albedo. Emissivity is the ability of a material to emit heat that it absorbs, while albedo is a measure of how much light that hits a surface is reflected without being absorbed. Materials with high emissivity can help reduce heat islands by releasing more of the heat they absorb, while those with high albedo can reflect more sunlight and thus stay cooler. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
NEW QUESTION # 167
The LEED credits given the greatest weights are credits that
- A. are included in the LEED for Buildings Operations and Maintenance: Existing Buildings rating system
- B. most directly address the most important environmental impacts and human benefits
- C. are used in certifying a LEED Platinum Project
- D. contribute to developmental density and Sustainable Sites
Answer: B
NEW QUESTION # 168
What is a reason to clearly identify the project boundary?
- A. To determine the total area of the project classified as a brownfield
- B. To define the building envelope
- C. To give priority for certification to projects with a smaller footprint
- D. To define the limits of site disturbance
Answer: D
Explanation:
The project boundary is the area within which the project team has authority to implement the LEED requirements. It is important to clearly identify the project boundary to define the limits of site disturbance, which can affect the environmental performance of the project. For example, limiting site disturbance can help reduce soil erosion, protect natural habitats, and conserve water resources. The project boundary also determines the scope of the site assessment and the applicability of some credits. Reference: LEED v4 BD+C Reference Guide, Introduction, page 13
NEW QUESTION # 169
Which is an example of a low-cost Water Efficiency strategy?
- A. Install subsurface cisterns to collect stormwater
- B. Install new flush valves or flow restrictors
- C. Incorporate an on-site blackwater treatment system
- D. Use only compostable toilets throughout the facility
Answer: B
NEW QUESTION # 170
Which of the following credit categories does not have a prerequisite?
- A. Indoor Environmental Quality
- B. Materials and Resources
- C. Location and Transportation
- D. Water Efficiency
Answer: D
Explanation:
Explanation
Water Efficiency is the only credit category that does not have a prerequisite in LEED v4 for Building Design and Construction. Prerequisites are the minimum requirements that all projects must meet to be eligible for LEED certification. They are mandatory and non-weighted, meaning they do not contribute to the project's score. The other credit categories have at least one prerequisite each, as shown in the table below:
References: LEED v4 Reference Guide for Building Design and Construction, p. 17 1; [LEED v4 BD+C Scorecard]
NEW QUESTION # 171
The cradle-to-cradle approach to sustainable materials evaluates
- A. building materials from extraction to disposal
- B. building materials from installation to recycling
- C. building materials from installation to disposal
- D. building materials from extraction to reuse
Answer: D
Explanation:
Explanation
The cradle-to-cradle approach to sustainable materials evaluates building materials from extraction to reuse, which means that the materials are considered as part of a continuous cycle of use and regeneration, rather than a linear process of consumption and disposal. The cradle-to-cradle approach aims to eliminate waste and pollution, conserve resources and energy, and create positive impacts for the environment and human health. The cradle-to-cradle approach is based on the principles of eco-effectiveness, which include designing products and systems that are safe and healthy for humans and nature, using renewable energy and clean water, celebrating diversity and creativity, and respecting social and environmental justice12. The cradle-to-cradle approach is also recognized and encouraged by LEED v4, which includes a credit for using products that have achieved Cradle to Cradle certification34.
NEW QUESTION # 172
Which strategy can be used during the building process and after occupation to reduce waste?
- A. Use certified lumber for framing
- B. Implement a recycling program
- C. Develop a Sustainable Purchasing Policy
- D. Use grey water for flushing of toilets
Answer: B
Explanation:
Recycling is a strategy that can be used during the building process and after occupation to reduce waste. Recycling involves collecting, sorting, processing, and reusing or selling materials that would otherwise be discarded as waste. Recycling can save natural resources, reduce greenhouse gas emissions, create jobs, and lower disposal costs1 . Recycling can also help to achieve LEED credits in the Materials and Resources category by reducing the amount of construction and demolition waste generated by the project or by diverting waste from landfills or incinerators. Reference: LEED v4 Green Associate Candidate Handbook1, EPA's Recycling Basics2, LEED v4 BD+C Reference Guide
NEW QUESTION # 173
Who completes and signs the credit templates for a project pursuing LEED certification?
- A. The local authorities having jurisdiction
- B. The certified LEED Reviewer
- C. The Commissioning (Cx) agent
- D. The specified team member
Answer: D
Explanation:
The credit templates are the online forms that document the achievement of the LEED credits for a project pursuing LEED certification. The credit templates are completed and signed by the specified team member who is responsible for the credit, such as the architect, engineer, contractor, or owner. The team member must provide the required information, calculations, narratives, and supporting documentation for each credit13. Reference: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3
NEW QUESTION # 174
Which of the following contribute to the triple bottom line?
- A. Green metrics and verification
- B. Social responsibility
- C. Project balance sheet
- D. Global security
Answer: B
Explanation:
Social responsibility is one of the factors that contribute to the triple bottom line. The triple bottom line is a framework that measures the performance of an organization or a project based on three dimensions: environmental, social, and economic. Social responsibility refers to the ethical obligation of an organization or a project to consider the impacts of its decisions and actions on society and stakeholders, such as employees, customers, communities, and future generations. The other options are not factors that contribute to the triple bottom line. Global security is a broad concept that encompasses various aspects of international relations, such as peace, human rights, justice, and cooperation. Project balance sheet is a financial statement that summarizes the assets, liabilities, and equity of a project at a given point in time. Green metrics and verification are tools and methods that quantify and validate the environmental performance of a project or a product. Reference: LEED Green Associate Candidate Handbook, page 31; USGBC [LEED v4 Impact Category: Triple Bottom Line], page 1.
NEW QUESTION # 175
Which of the following narratives explains the relationship between prerequisites and credits for purposes of LEED certification?
- A. Credits are assigned the same base points and prerequisites are weighted
- B. Prerequisites are mandatory if credits are pursued in the specific category
- C. Prerequisites are mandatory and credits are optional
- D. Not all credit categories have a prerequisite
Answer: C
Explanation:
Explanation
Prerequisites and credits are the two types of requirements that make up the LEED rating system. Prerequisites are the basic elements or strategies that must be included in any LEED certified project, regardless of the rating system or the level of certification1. Credits are the additional elements or strategies that can be included in a LEED project to achieve higher levels of performance and certification1. Credits are optional and have different point values depending on their environmental benefits and impacts2. Therefore, the correct answer is B. Prerequisites are mandatory and credits are optional.
References:
LEED v4 | U.S. Green Building Council
LEED credit library | U.S. Green Building Council
NEW QUESTION # 176
......
LEED-Green-Associate Exam Brain Dumps - Study Notes and Theory: https://www.vcetorrent.com/LEED-Green-Associate-valid-vce-torrent.html
100% Guaranteed Results LEED-Green-Associate Unlimited 275 Questions: https://drive.google.com/open?id=1-4XQFsgcWuv5WdNVzJc5rYAq4z-C7Qa8