[Nov 07, 2021] Get New JN0-103 Certification Practice Test Questions Exam Dumps
Real JN0-103 Exam Dumps Questions Valid JN0-103 Dumps PDF
NEW QUESTION 23
Which command is used to validate the syntax of a configuration without applying the configuration?
- A. commit confirmed
- B. commit check
- C. commit synchronize
- D. commit and-quit
Answer: B
NEW QUESTION 24
***Exhibit is Missing***
What does the number inside the square bracket represent?
- A. Local preference
- B. Protocol reference number
- C. Route preference
- D. Metric
Answer: C
NEW QUESTION 25
Exhibit:
You notice traffic destined to 172.31.17.0/24 is traversing an OSPF path rather than BGP Path.
What is causing this behavior?
- A. The 172.31.17.0/24 BGP route's outgoing interface is down
- B. The 172.31.17.0/24 route does not have a valid BGP entry
- C. The 172.31.17.0/24 BGP route is missing a valid default next hop
- D. The 172.31.17.0/24 BGP has a higher route preference
Answer: D
NEW QUESTION 26
What will be the result?
- A. The device will boot into multi-user mode at the shell prompt.
- B. The device will boot in single-user mode at the operational prompt.
- C. The device will boot into single-user mode at the shell prompt.
- D. The device will boot in multi-user mode at the configuration prompt.
Answer: A
NEW QUESTION 27
Referring to the exhibit,
***Exhibit is Missing***
which command will change the 172.16.10.1/24 IP address to
172.6.100.1/24 IP address?
- A. copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
- B. rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
- C. Set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24
- D. insert interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before address 172.16.100.1/24
Answer: C
NEW QUESTION 28
Referring to the Exhibit,
What information is provided about the route to 192.168.47.0/24?
Choose Two
- A. There is a single next-hop available to 192.168.47.0/24
- B. There is a single active route to 192.168.47.0/24
- C. There are two active route to 192.168.47.0/24
- D. There are two next-hops available to 192.168.47.0/24
Answer: A,B
NEW QUESTION 29
Which two statements are true regarding dynamic routing? (Choose two)
- A. Participating devices dynamically learn routing information from each other
- B. Dynamic routing is used when absolute control of routing parameters is necessary
- C. Dynamic routing requires more administrative overhead than static routing
- D. Dynamic routing allows a device to automatically reroute traffic around a failure
Answer: A,D
NEW QUESTION 30
Which statement is true about the orlongerroute-filter match type?
- A. All routes within the specified prefix that are longer or equal to the given prefix up to a defined acceptable prefix length are considered a match.
- B. All routes within the specified prefix that are longer than or equal to the given prefix are considered a match.
- C. All routes within the specified prefix that are longer than the given prefix are considered a match.
- D. All routes within the specified prefix that are longer than the given prefix up to a defined acceptable prefix length are considered a match.
Answer: B
NEW QUESTION 31
You are troubleshooting an issue and want to monitor syslog in real time. Which operational command accomplishes this task?
- A. monitor traffic interface fxp0.0
- B. show log messages | refresh 1
- C. monitor start messages
- D. show log messages
Answer: C
NEW QUESTION 32
Which keystrokes are used to auto-complete user-defined variables?
- A. End
- B. Home
- C. Spacebar
- D. Tab CC
Answer: D
NEW QUESTION 33
Which statement is true about the longer router-filter match type?
- A. All router within the specified prefix that are longer than given prefix are considered a match.
- B. All router within the specified prefix that are longer than or equal to the given prefix are considered a match.
- C. All router within the specified prefix that are longer than the given prefix up to a defined acceptable prefix length are considered a match.
- D. All router within the specified prefix that are longer or equal to the given prefix up to a defined acceptable prefix length are considered a match.
Answer: B
NEW QUESTION 34 
Referring to the exhibit, what is the expected behavior for login attempts from users that receive a reject form from both the RADIUS and TACACS+ servers?
- A. Users are granted limited access to the device using a guest account.
- B. Users are not prompted for a local authentication password.
- C. Users are prompted for the root authentication password.
- D. Users are prompted for a local authentication password.
Answer: B
Explanation:
Explanation
Local Auth is not included in the authentication-order. It will only consult the local auth if it doesn't recieved any reply from the RADIUS and TACAS from a certain time. In this case the RADIUS and TACAS rejects the Authentication therefore no need to consult the local auth.
NEW QUESTION 35
You notice that the terms in your firewall filter are not in the correct order.
What would solve this problem?
- A. Use the reject action to change the action of the filter.
- B. Use the next term action to force an evaluation of the next term.
- C. Use the count parameter to ensure that the terms are evaluated correctly.
- D. Use the insert command to reorder the terms within the filter.
Answer: D
NEW QUESTION 36
Which command will show files stored in the /var/home/tab directory?
- A. lab@router> file show
- B. [edit] lab@router# rollback ?
- C. lab@router> file list
- D. lab@router> ls
Answer: C
NEW QUESTION 37
You are in configuration mode at the top of the hierarchy. You need to abort the changes that you have made and start again with a fresh copy of the active configuration. Which command should you use to accomplish this task?
- A. reset config
- B. rollback 0
- C. load active
- D. clear candidate config
Answer: B
NEW QUESTION 38
The monitor traffic command provides access to which utility?
- A. traceroute
- B. telnet
- C. netstat
- D. tcpdump
Answer: D
NEW QUESTION 39
When a system process encounters an error, how does the Junos OS protect the other processes from being impacted?
- A. Each process operates in its own shared memory space.
- B. Each routing protocol runs as an individual process.
- C. The Junos OS executes multiple processes simultaneously.
- D. The Junos OS executes only one process at a time.
Answer: B
NEW QUESTION 40
Which type of route does the configuration create?
- A. a non-advertised route
- B. a generated route
- C. an indirect next hop
- D. a default gateway
Answer: D
NEW QUESTION 41
Referring to the exhibit,
which command will cause this event message?
- A. request system recover
- B. request system commit
- C. request system logout
- D. request system halt
Answer: D
NEW QUESTION 42
Referring to the Exhibit,
***Exhibit is Missing***
Which statement is true?
- A. Traps are sent to 10.21.15.180
- B. Traps are sent to 10.21.15.16
- C. Traps are allowed from 10.21.15.16
- D. Traps are allowed from 10.21.15.180
Answer: C
NEW QUESTION 43
A Junos device is in a factory-default configuration and no host name is set. What is used in place of a host name in this scenario?
- A. router
- B. user
- C. amnesiac
- D. Junos
Answer: C
NEW QUESTION 44
What are two services performed by the Packet Forwarding Engine? (Choose two.)
- A. to maintain the routing tables
- B. to implement stateless firewall filtering
- C. to handle processes that control the device's Interfaces
- D. to process transit traffic
Answer: C,D
NEW QUESTION 45 
Referring to the exhibit, which command will change the 172.16.10.1/24 IP address to 172.16.100.1/24 IP address?
copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address
- A. address 172.16.100.1/24
- B. 172.16.100.1/24
rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to - C. insert interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before
- D. address 172.16.100.1/24
set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24
Answer: D
NEW QUESTION 46
You issue a "request system zeroize" command. Which statement is correct in this scenario?
- A. All data files are deleted and all configuration settings are returned to factory defaults.
- B. All data files are deleted and all configuration settings remain unchanged
- C. Disk space is freed by rotating log files and a proposed list of files to be deleted is presented.
- D. All data files remain unchanged but all configuration settings returned to factory defaults.
Answer: A
NEW QUESTION 47
......
Prerequisites
Since the Juniper JN0-103 exam is designed to measure the individuals’ ability to deploy fundamental networking and Juniper operating system services, the students should only have primary networking knowledge to qualify for this certification test. This makes the exam suitable for those who want to establish their IT career in networking. Juniper JN0-103 is an ideal choice for those who are just starting their journey in this field or have just limited experience in this domain.
JN0-103 Exam Dumps - PDF Questions and Testing Engine: https://www.vcetorrent.com/JN0-103-valid-vce-torrent.html