Printable & Easy to Use 300-410 Dumps 100% Same Q&A In Your Real Exam
300-410 Practice Test Give You First Time Success with 100% Money Back Guarantee!
Who Should Take Cisco 300-410 Exam?
A Cisco Certified Entry Network Technician (CCENT) validates the skills needed to support a small network and also provides basic knowledge of routing and switching fundamentals. CCENT is an entry level certification for aspiring Network engineers. Syllabus of CCENT exam is available for you. Refund policy of Cisco 300-410 exam is also available for you. Collection of Document for CCENT is also available for you. Validates the skills needed to support a small network. Questions and answers are available in Cisco 300-410 Dumps. Sources of Cisco 300-410 exam questions are available for you. Issues deal with the networking concepts and skills of Networking students. Focus on the subject of Cisco 300-410 exam questions and answers. Offering Networking courses to students has been the focus point of the company. Mistakes made by the students are highly appreciated. Access to Cisco 300-410 exam material is very difficult. Actual exam questions are available for you. Challenging Cisco 300-410 exam is one of the best opportunities for students. Practice test questions are available for you. Validate your knowledge with highly verified Cisco 300-410 exam dumps. Earn valuable certification by passing Cisco 300-410 exam in first attempt.
Challenging Cisco 300-410 exam is one of the best opportunities for students. Frequently asked questions for this Cisco 300-410 exam are available online in the form of answers. Cisco's exam questions are very difficult to answer, without the help of 300-410 exam dumps. Frequent errors are committed by the students in Cisco 300-410 exam. High quality CCENT preparation materials with free updates for one year are available with money back guarantee. Knowing the facts about Cisco 300-410 exam is very difficult. Failure can be avoided with the help of Cisco 300-410 exam simulator and CCENT practice questions. Enroll in our course and get certified in Networking. Collected questions are available for you.
Cisco 300-410 certification exam is an essential credential for network professionals who want to advance their careers in enterprise networking. Implementing Cisco Enterprise Advanced Routing and Services certification validates a candidate's ability to implement advanced routing technologies and services in complex enterprise networks, making them valuable assets to their organizations. Implementing Cisco Enterprise Advanced Routing and Services certification exam also demonstrates a candidate's commitment to continuous learning and professional development, which is highly valued in the IT industry.
NEW QUESTION # 287
Refer to the exhibit.
R1 is configured with uRPF, and ping to R1 is failing from a source present in the R1 routing table via the GigatxtEthernet 0/0 interface. Which action resolves the issue?
- A. Modify the uRPF mode from strict to loose
- B. Enable Cisco Express Forwarding to ensure that uRPF is functioning correctly
- C. Add a floating static route to the source on R1 to the GigabitEthernet 0/1 interface
- D. Remove the access list from the interface GigabrtEthernet 0/0
Answer: A
NEW QUESTION # 288
A company Is redesigning WAN infrastructure so that all branch sites must communicate via the head office and the head office can directly communicate with each site independently. The network engineer must configure the head office router by considering zero-touch technology when adding new sites in the same WAN infrastructure. Which configuration must be applied to the head office router to meet this requirement?
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: D
NEW QUESTION # 289
Refer to Exhibit:
AS 111 wanted to use AS 200 as the preferred path for 172.20.5.0/24 and AS 100 as the backup. After the configuration, AS 100 is not used for any other routes. Which configuration resolves the issue?
- A. route-map SETLP permit 10
match ip address prefix-list PLIST1
set local-preference 110
route-map SETLP permit 20 - B. router bgp 111
no neighbor 192.168.10.1 route-map SETLP in
neighbor 192.168.10.1 route-map SETLP out - C. router bap 111
no neighbor 192.168.10.1 route-map SETLP in
neighbor 192.168.20.2 route-map SE TLP in - D. route-mmap SETLP permit 10
match ip address prefix-list PLIST1
set local-preference 99
route-map SETLP permit 20
Answer: D
Explanation:
There is an implicit deny all at the end of any route-map so all other traffic that does not match 172.20.5.0/24 would be dropped. Therefore we have to add a permitsequence at the end of the route-map to allow other traffic.
The default value of Local Preference is 100 and higher value is preferred so we have to set the local preference of AS100 lower than that of AS200.
NEW QUESTION # 290
Refer to the exhibit.
A network administrator successfully logs in to a switch using SSH from a (RADIUS server When the network administrator uses a console port to access the switch the RADIUS server returns shell:priv-lvl=15'' and the switch asks to enter the enable command \ the command is entered, it gets rejected. Which command set is used to troubleshoot and reserve this issue?
- A. line con 0aaa authorization console!line vty 0 4authorization exec
- B. line con 0aaa authorization console priv15!line vty 0 4authorization exec
- C. line con 0aaa authorization consoleauthorization priv15!line vty 0 4transport input ssh
- D. line con 0aaa authorization consoleauthorization exec!line vty 0 4transport input ssh
Answer: D
NEW QUESTION # 291
What is a function of an end device configured with DHCPv6 guard?
- A. If it is configured as a client, messages are switched regardless of the assigned role.
- B. If it is configured as a server, only prefix assignments are permitted.
- C. If it is configured as a client, only DHCP requests are permitted.
- D. If it is configured as a relay agent, only prefix assignments are permitted.
Answer: A
Explanation:
Explanation
The DHCPv6 Guard feature blocks reply and advertisement messages that come from unauthorized DHCP servers and relay agents.
Packets are classified into one of the three DHCP type messages. All client messages are always switched regardless of device role. DHCP server messages are only processed further if the device role is set to server. Further processing of server messages includes DHCP server advertisements (for source validation and server preference) and DHCP server replies (for permitted prefixes).
If the device is configured as a DHCP server, all the messages need to be switched, regardless of the device role configuration.
NEW QUESTION # 292
Which SNMP verification command shows the encryption and authentication protocols that are used in SNMPV3?
- A. show snmp
- B. show snmp view
- C. show snmp group
- D. show snmp user
Answer: D
NEW QUESTION # 293
An engineer is implementing a coordinated change with a server team. As part of the change, the engineer must configure interlace GigabitEthernet2 in an existing VRF "RED" then move the interface to an existing VRF "BLUE" when the server team is ready. The engineer configured interface GigabitEthemet2 in VRF
"RED"
Which configuration completes the change?
- A. interface GigabitEthernet2
no vrf forwarding RED
vrf forwarding BLUE
ip address 10.0.0.0 255.255.255.254 - B. interface GigabitEthernet2
no ip address
vrf forwarding BLUE - C. interface GigabitEthernet2
no vrf forwarding RED
vrf forwarding BLUE - D. interface GigabitEthernet2
no ip address
ip address 10.0.0.0 255.255.255.254
vrf forwarding BLUE
Answer: A
Explanation:
When assigning an interface to a VRF, the IP address will be removed so we have to reassign the IP address to that interface.
NEW QUESTION # 294
:589
Aswitchhas been configured to provide DHCP relay on VLAN 100 to a server with an IP address of 10.1.1.1.
The DHCP server is sending syslog reports of multiple TFTP requests that also originate from the switch. As a result, the server CPU exceeded a configured threshold. Which action does the network administrator recommend to bring the server CPU threshold down?
- A. Configure the switch with no ip forward-protocol udp 69 on VLAN100.
- B. Configure the switch with a VACL on VLAN100 to deny TFTP.
- C. Configure the switch with ip forward-protocol udp 67 globally.
- D. Configure the switch with an access list on VLAN100 to deny TFTP.
Answer: A
NEW QUESTION # 295
Refer to the exhibit.
In which circumstance does the BGP neighbor remain in the idle condition?
- A. if prefixes exceed the maximum limit
- B. if prefixes reach the maximum limit
- C. if prefixes are not received from the BGP peer
- D. if a prefix list is applied on the inbound direction
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/25160-bgp-maximum-prefix.html#
NEW QUESTION # 296
Refer to the exhibit.
The engineer configured and connected Router2 to Router1. The link came up but could not establish a Telnet connection to Router1 IPv6 address of 2001:DB8::1. Which configuration allows Router2 to establish a Telnet connection to Router1?
- A. permit ICMPv6 on access list INGRESS for Router2 to obtain IPv6 address
- B. IPv6 address on GigabitEthernet0/0
- C. jpv6 unicast-routing
- D. permit ip any any on access list EGRESS2 on Router1
Answer: B
Explanation:
--------------------------R1--------------------------------------------- interface Ethernet0/0 ip address 209.165.201.1 255.255.255.0 ip access-group EGRESS2 out ipv6 address 2001:DB8::1/64 end
----------------------R2-------------------------------------------------- interface Ethernet0/0 ip address 209.165.201.25 255.255.255.0 ipv6 address 2001:DB8::2/64 ipv6 address autoconfig ipv6 nd autoconfig default-route ipv6 nd cache expire 60 ipv6 nd ra suppress ipv6 traffic-filter INGRESS in end IOU_Router2#telnet 2001:DB8::1 Trying 2001:DB8::1 ... Open IOU_Router1>
------------------------------------------------------------------------------
NEW QUESTION # 297
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
Explanation
Same Answer is already updated below:
HTTP and HTTPs run on TCP port 80 and 443, respectively and we have to remember them.
Syslog runs on UDP port 514 while NTP runs on UDP port 123 so if we remember them we can find out the matching answers easily. But maybe there is some typos in this question as 2001:d88:800:200c::c/126 only ranges from 2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f (4 hosts in total). It does not cover host 2001:0D88:0800:200c::1f. Same for 2001:D88:800:200c::e/126, which also ranges from
2001:d88:800:200c:0:0:0:c to 2001:d88:800:200c:0:0:0:f and does not cover host 2001:0D88:0800:200c::1c
.
NEW QUESTION # 298
Refer to the exhibit.
An engineer is trying to configure local authentication on the console line, but the device is trying to authenticate using TACACS+. Which action produces the desired configuration?
- A. Add the aaa authentication login default group tacacs+ local-case command to the global configuration.
- B. Add the login authentication Console command to the line configuration
- C. Replace the capital "C" with a lowercase "c" in the aaa authentication login Console local command.
- D. Add the aaa authentication login default none command to the global configuration.
Answer: B
NEW QUESTION # 299
Refer to the exhibits.
Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands are missing? (Choose two.)
- A. The ip nhrp shortcut command is missing on the hub router.
- B. The ip nhrp shortcut command is missing on the spoke routers.
- C. The ip nhrp redirect command is missing on the spoke routers.
- D. The ip nhrp redirect command is missing on the hub router.
- E. The ip nhrp map command is missing on the hub router.
Answer: B,D
NEW QUESTION # 300
Refer to the exhibit.
AS111 is receiving its own routes from AS200 causing a loop in the network. Which configuration provides loop prevention?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION # 301
Drag and drop the descriptions from the left onto the corresponding MPLS components on the right.
Answer:
Explanation:
Explanation:
Table Description automatically generated
NEW QUESTION # 302
Refer to the exhibit.
A network administrator configured an IPv6 access list to allow TCP return frame only, but it is not working as expected. Which changes resolve this issue?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/122_55_se/configuration/ e/scg3750/swv6acl.html
NEW QUESTION # 303
:576
Refer to the exhibit. R1 and R2 have been configured where the neighbor relationship must be authenticatedusmgMD5:
The neighbor relationship is not coming up. Which configuration resolves the issue?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: C
NEW QUESTION # 304 
Refer to the exhibit R2 can reach Loopback222, but R1 SW1 and PC1 cannot communicate with 172.16.222
254 R1 and R2 configurations are shown here
Which EIGRP configuration command resolves the issue?
- A. R1 (config-router)# network 172.16.222.264 255.255.255.255
- B. R2(config-router) # redistribute static
- C. R1(config-router)# redistribute static
- D. R1(conftg-router)# network 172.16.222.254 0.0.0.0
Answer: B
NEW QUESTION # 305
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
NEW QUESTION # 306
Drag and drop the MPLS concepts from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 307
......
The 300-410 exam focuses on advanced routing technologies such as Border Gateway Protocol (BGP), Multiprotocol Label Switching (MPLS), and Quality of Service (QoS), as well as advanced services such as VPN, IP SLA, and Network Address Translation (NAT). 300-410 exam is designed for network engineers who are responsible for designing, implementing, and managing complex enterprise networks that require advanced routing and services.
Fully Updated Free Actual Cisco 300-410 Exam Questions: https://www.vcetorrent.com/300-410-valid-vce-torrent.html
All Obstacles During 300-410 Exam Preparation with 300-410 Real Test Questions: https://drive.google.com/open?id=1NuHC7bEOwZLswPTFWd_QBYdd4Z5JKm6M