NS0-592 Free Update With 100% Exam Passing Guarantee [2021]
[Jul-2021] Verified Network Appliance Exam Dumps with NS0-592 Exam Study Guide
NEW QUESTION 25
Which statement is correct about the wafliron command?
- A. The wafliron command is used to correct inconsistent WAFL metadata.
- B. The wafliron command is used to correct WAFL i2p inconsistencies.
- C. The wafliron command is used to correct parity inconsistencies.
- D. The wafliron command is used to correct inconsistent user data blocks.
Answer: A
NEW QUESTION 26
Click the exhibit button.
A customer's system reported several errors. There was no disruption, but the customer is concerned about the system's health.
Referring to the exhibit, which statement is true?
- A. One of the IOM modules on shelf 20 has failed.
- B. Storage redundancy is degraded.
- C. One of the switches has failed.
- D. Port 1D on the system has failed.
Answer: B
NEW QUESTION 27
A customer reports that one their SVMs has two default gateways. The customer wants to know whether this behavior is expected or if one of gateways should be deleted.
In this scenario, what do you tell the customer?
- A. This situation is a misconfiguration, and the customer should delete one of the default gateways because there can be only gateway for each SVM.
- B. The configuration is acceptable if the customer configures different metrics on all defaults routes.
- C. The configuration is acceptable only if both default gateways are in the same subnet.
- D. The configuration is acceptable. The customer can achieve load balancing between the default gateways by setting the same metric on all default routes.
Answer: B
NEW QUESTION 28
Your customer added a new DS2246 shelf to an existing stack on their FAS8060A system. The customer then noticed that the new shelf's disks appear with the shelf serial number instead of the shelf ID in the sysconfig -r command output.
What is the reason for this problem?
- A. The ACP is cabled incorrectly.
- B. The SAS is cabled incorrectly.
- C. The new shelf has the same ID as another shelf.
- D. There is failed IOM module in the new shelf.
Answer: B
NEW QUESTION 29
After you replaced the motherboard, the node stopped in the "waiting for the cluster application to come online" state.
Which two actions should you perform to troubleshoot this problem? (Choose two.)
- A. Check the status of the cluster with the cluster ring show command.
- B. Check the status of the HA with the interconnect-up field of storage failover show command.
- C. Verify the setting of the cluster interconnect switch.
- D. Verify that the physical links on the cluster ports are up.
Answer: A,B
NEW QUESTION 30
What is a major difference between NFSv3 and NFSv4.x?
- A. NFSv4.x is stateless, and NFSv3 is stateful.
- B. NFSv4.x is stateful, and NFSv3 is stateless.
- C. NFSv4.x requires an auxiliary protocol for status monitoring, and NFSv3 does not.
- D. NFSv4.x requires an auxiliary protocol for mounting, and NFSv3 does not.
Answer: B
NEW QUESTION 31
A customer called you after a failure in their Microsoft Hyper-V environment on the "SVM1" SVM. The customer wants to enable nondisruptive operations (NDO) to prevent future failures.
In this scenario, which two actions must be performed? (Choose two.)
- A. Verify that the continuously-available option is set on the CIFS share.
- B. Verify that the branchcache option is set on the CIFS share.
- C. Verify that SMB3 is enabled.
- D. Verify that SMB2 is enabled.
Answer: A,D
NEW QUESTION 32
You want to determine which SMB versions that a CIFS server can use when communicating with external servers.
Which two CIFS server settings should be reviewed to accomplish this task? (Choose two.)
- A. smb1-enabled
- B. smb1-enabled-for-dc-connections
- C. smb2-enabled
- D. smb2-enabled-for-dc-conections
Answer: A,D
NEW QUESTION 33
Click the exhibit button.
A customer reports that their system recently began logging an error.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The bcomd application is responsible for monitoring the observed behavior.
- B. A user is attempting to restart the ntpd daemon.
- C. The spmd application failed to restart the ntpd daemon.
- D. The ntpd daemon is responsible for time services.
Answer: B,D
NEW QUESTION 34
You configured iSCSI multipathing on a Windows host to a 2-node ONTAP cluster so that you can attach to some LUNs. You see that the host logging in to both iSCSI LIFs in the ONTAP cluster, and you notice that the igroup is correctly set. After you open Disk Management and rescan for disks, the NetApp LUNs do not show up.
In this scenario, what should be performed to enable the LUNs to be visible to the Windows host?
- A. Configure the ONTAP nodes for HA and try scanning again.
- B. Configure the SVM for FCP and try scanning again.
- C. Set up LUN mapping and try scanning again.
- D. Set up Selective LUN Mapping (SLM) and try scanning again.
Answer: D
NEW QUESTION 35
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?
- A. The cloned LUN needs to be mapped to an initiator group.
- B. The cloned volume must be split from the source volume before the LAN can be used.
- C. The cloned LUN must be renamed to a different name than the name of the source LUN.
- D. The cloned LUN must be brought online.
Answer: B
NEW QUESTION 36
Click the exhibit button.
Your customer added a new DS4246 shelf to their FAS system. They created an aggregate on the new shelf.
Two weeks later, they log in to Active IQ and discover the Medium Impact error shown below.
"Both SAS connections from one controller go to the same shelf."
Referring to the exhibit, which statement is correct?
- A. You are unable to obtain a "Cable Visualization" overview from Active IQ.
- B. A faulty cable is causing the problem.
- C. A faulty IOM is causing the problem.
- D. You can correct this problem without downtime on the FAS system.
Answer: D
NEW QUESTION 37
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?
- A. View the active network connections to the node to see if there a large number of active connections.
- B. Run the network statistics lif show command for the intercluster LIF to simulate a network connection.
- C. Use the ifstat command to collect network performance data for the physical interface.
- D. Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.
Answer: D
NEW QUESTION 38
Click the exhibit button.
Your customer has severe latency on one of their SATA aggregates. You run the statit -b and statit -e commands to obtain detailed disk statistics.
Referring to the output shown in the exhibit, which disk would be the problem?
- A. 0a.11.19
- B. 0a.13.21
- C. 0a.11.21
- D. 0a.11.23
Answer: A
NEW QUESTION 39
A customer performs a takeover and giveback of their controllers and notices that several of their NFS clients lose access to their volumes for a short period of time during the SFO process. The customer reviewed the LIF failover policies, and the polices are correct.
What is the reason for this behavior?
- A. The export policies are incorrect and must be updated with node's HA partner LIF information.
- B. A firewall is blocking the necessary network ports and needs to be updated to allow NFS communication.
- C. NFSv4 file locks need to be broken manually before initiating an SFO operation.
- D. The clients are using NFSv4 to access the volumes.
Answer: D
NEW QUESTION 40
Two weeks ago, your customer experienced a data outage, which caused their MCC to switch over. When the power was restored, they found that 14 disks over three RAID groups had failed, which caused two data aggregates to lose their mirror plexes.
In this situation, before you perform a switchback, which three actions should be taken? (Choose three.)
- A. Assign all disks on the remote site to the surviving nodes.
- B. Adjust bridge configuration for the replaced disks.
- C. Initiate the aggregate healing phases.
- D. Mirror the unmirrored aggregates
- E. Delete the failed plexes.
Answer: B,C,D
NEW QUESTION 41
......
Authentic Best resources for NS0-592 Online Practice Exam: https://www.vcetorrent.com/NS0-592-valid-vce-torrent.html