Tested Material Used To HPE6-A73 Test Engine Exam Questions in here [Sep-2021]
Penetration testers simulate HPE6-A73 exam PDF
NEW QUESTION 28
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 0 has 13 routes
- C. Area 1 has 23 routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: C
NEW QUESTION 29
What is a concept associated with PIM sparse mode (SM)?
- A. Implements a push content to forward traffic from the multicast source.
- B. Recommended for use when high bandwidth connections exist.
- C. Reverts to forwarding when the pruning state times out.
- D. Requires periodic joins to maintain the shortest path tree (SPT).
Answer: B
NEW QUESTION 30
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of "Unknown".
What is the cause of this issue?
- A. A connectivity issue exists between NAE and the AOS-CX switch
- B. The RESTful API has not been enabled on the AOS-CX switch
- C. The administrator does not have the appropriate credentials to interact with NAE
- D. The number of scripts or agents has exceeded the hardware's capabilities
Answer: A
NEW QUESTION 31
An administrator creates an ACL rule with both the "count" and "log" option enabled. What is correct about the action taken by an AOS-CX switch when there is a match on this rule?
- A. The "count" and "log" options are processed by the AOS-CX switch's hardware ASIC
- B. Logging will not include certificate and TLS events, but counting will
- C. By default, a summarized log is created every minute with a count of the number of matches
- D. The total in the "log" record and the count could contain different rule matching statistics
Answer: D
NEW QUESTION 32
What is correct regarding the configuration of ACLs on AOS-CX switches?
- A. Standard ACLs are used to match on routes when performing route distribution.
- B. Statements with the log keyword are always processed by the switch CPU.
- C. Numbers 100 through 199 and 2000 through 2999 are used when creating extended ACLs.
- D. Wildcard masks are used to match on a range of IP addresses.
Answer: D
NEW QUESTION 33
Examine the network topology.
The network is configured for OSPF with the following attributes:
* Core1 and Core2 and ABRs
* Area 1 has 20 networks in the 10.1.0.0/16 range
* Area 0 has 10 networks in the 10.0.0.0/16 range
* Area 2 has 50 networks in the 10.2.0.0/16 range
* The ASBR is importing a static route into Area 1
* Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 0 has 13 routes
- C. Area 1 has 23 routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: C
NEW QUESTION 34
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.The script was written in Python and was successfully added on other AOS-CX switches The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Enable trust settings for the AOS-CX switch's SSL certificate.
- B. Ensure the engineers desktop and the AOS-CX switch are synchronized to the same NTP server
- C. Remove a script that is no longer used before installing the new script
- D. Install the script's signature before installing the new script
Answer: C
NEW QUESTION 35
A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?
- A. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
- B. Change the destination multicast address to 239.1.1.1
- C. Define the 239.0.0.1 stream on the PIM candidate bootstrap router
- D. Define the 239.0.0.1 stream on the rendezvous point (RP)
Answer: D
NEW QUESTION 36
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure the engineers PC is synchronized to the same NTP server as the AOS-CX switch
- B. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server.
- C. Enable trust settings for the AOS-CX switch's SSL certificate
- D. Ensure the engineers web browser is configured for the same timezone as the AOS-CX switch
Answer: A
NEW QUESTION 37
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 1 to Client 3
- B. Client 1 to Client 2
- C. Server 1 to Client 1
- D. Server 2 to Client 2
- E. Client 3 to Client 2
Answer: B,C
NEW QUESTION 38
The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)
- A. Transfer files between the switch and your mobile device.
- B. Create a stack of AOS-CX switches.
- C. Securely access the switch using SSH.
- D. Use NetEdit to manage switch configuration.
- E. Schedule an operating system upgrade.
Answer: A,C
NEW QUESTION 39
What is correct regarding multicasting and AOS-CX switches?
- A. IGMP query functions are enabled, by default, on Layer-2 VLAN interfaces
- B. IGMP snooping is disabled, by default, on Layer-2 VLAN interfaces
- C. IGMP snooping is enabled, by default, on Layer-3 VLAN interfaces
- D. IGMP-enabled AOS-CX switches flood unknown multicast destinations
Answer: D
NEW QUESTION 40
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. The VSX LAG hash does not match the remote peer
- B. LACP was enabled in active mode on the VSX LAG
- C. The VSX LAG interfaces are in layer-3 mode
- D. Local optimization was not enabled on the VSX LAG
Answer: A
NEW QUESTION 41
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers web-ports
- B. access-list ip server 10 permit tcp any group web-servers group web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any web-servers group web-ports
Answer: A
NEW QUESTION 42
A network engineer for a company with 012 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 5 seconds
- B. Once every 30 seconds
- C. Once every 60 seconds
- D. Once every 1 second
Answer: A
NEW QUESTION 43
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 0 has 13 routes
- C. Area 1 has 23 routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: C
NEW QUESTION 44
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. Classifier policies
- C. User-based tunneling (UBT)
- D. Policy-based routing (PBR)
Answer: C
NEW QUESTION 45
A company has just purchased AOS-CX switches The company has a free and open-source AAA solution The company wants to implement access control on the Ethernet ports of the AOS-CX switches.
Which security features can the company implement given the equipment that they are using?
- A. Port-based tunneling
- B. Downloadable user roles
- C. Local user roles
- D. Device fingerprinting
Answer: C
NEW QUESTION 46
A network engineer for a company with 896 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 5 seconds
- B. Once every 30 seconds
- C. Once every 60 seconds
- D. Once every 1 second
Answer: C
NEW QUESTION 47
A network administrator is implementing a configuration plan in NetEdit The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?
- A. EDIT
- B. VALIDATE
- C. DEPLOY
- D. COMMIT
Answer: D
NEW QUESTION 48
......
Authentic Best resources for HPE6-A73 Online Practice Exam: https://www.vcetorrent.com/HPE6-A73-valid-vce-torrent.html
Get the superior quality HPE6-A73 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1H6Sl6rLs8mx8sdr6GNS-O5nWzg4rM0XM