Get ready to pass the 350-601 Exam right now using our CCNP Data Center Exam Package
A fully updated 2021 350-601 Exam Dumps exam guide from training expert VCETorrent
How to book the Cisco 350-601: Implementing and Operating Cisco Data Center Core Technologies Exam
These are the following steps for registering for the 350-601 exam test:
- Step 1: Visit to 350-601 exam registration
- Step 2: Sign up/log in to the Pearson VUE account
- Step 3: Search for 350-601 Certifications Exam
- Step 4: Select Date, time and confirm with a payment method
NEW QUESTION 39
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
Explanation:
NEW QUESTION 40
Drag and drop the storage technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 41
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created.
The cluster IP address is 10.68.68.68. Which command set creates this certificate request?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION 42
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created.
The cluster IP address is 10.68.68.68.
Which command set creates this certificate request?
- A. UCS-B # scope keyring kr2016
UCS-B /keyring # create certreq ip 10.68.68.68 subject-name sjc2016
UCS-B /keyring* # commit-both - B. UCS-B# scope security
UCS-B /security # scope keyring kr2016
UCS-B /security/keyring # set certreq 10.68.68.68 sjc2016
UCS-B /security/keyring* # commit-both - C. UCS-A# scope security
UCS-A /security # scope keyring kr2016
UCS-A /security/keyring # create certreq ip 10.68.68.68 subject-name sjc2016 UCS-A /security/keyring* # commit-buffer - D. UCS-A # scope keyring kr2016
UCS-A /keyring # create certreq 10.68.68.68 sjc2016
UCS-A /keyring* # commit-buffer
Answer: C
NEW QUESTION 43
An engineer is implementing security on the Cisco MDS 9000 switch.
Drag and drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
NEW QUESTION 44
Refer to the exhibit.
The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?
- A. N7K-1 appears as the STP root.
- B. N7K-1 and N7K-2 appear as a single STP root.
- C. N7K-1 preempts N7K-2 as the STP root.
- D. N7K-2 appears as the STP root.
Answer: B
NEW QUESTION 45
A cisco Nexus 9000 series switch experiences a startup configuration comuption. The engineer must implement a procedure to recover configuration file from the switch. Which command set must be used?
- A. 1. Clear the current configuration of the switch
2. Restart the device.
3. Copy the running configuration to the startup configuration
4. Copy a previously saved configuration file to the running configuration - B. 1. Copy the running-configuration to the startup configuration.
2. Clear the current configuration of the switch.
3. Restart the device.
4. Copy a previously saved configuration file to the running configuration. - C. 1. Clear the current configuration of the switch
2. Restart the device.
3. Copy a previously saved configuration file to the running-configuration
4. Copy the running-configuration to the startup configuration. - D. 1.Restarting device.
2. Copy the running-configuration file to a remote server.
3. Clear the current configuration of the switch.
4. Copy the running configuration to the startup configuration
Answer: C
NEW QUESTION 46
Refer to the exhibit.
Which statement about the ERSPAN configuration in this environment is true.
- A. The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.
- B. Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.
- C. The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.
- D. Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.
Answer: D
NEW QUESTION 47
What is a feature of NFS?
- A. block-based file access
- B. Kerberos-based security model
- C. role-based access control
- D. zone-based access control
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security-vpn/kerberos/16087-1.html#modifiednfs
NEW QUESTION 48
Refer to the exhibit.
A network engineer plan to upgrade the current software Image of a Cisco nexus switch. What is the impact of starting the EPLD upgrade?
- A. The switch reboots one time for the new EPLD versions to take effect.
- B. The switch skips the EPLD upgrade for MIFPGA and proceeds with the other EPLD devices.
- C. The switch reboots multiple times for the new EPLD versions to take effect.
- D. The switch skips the EPLD upgrade for each EPLD device of the switch.
Answer: A
NEW QUESTION 49
A host EDG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?
- A. The host in EPG Client can connect to TCP destination port 80 on the webserver in EPG Web. The webserver will not be able to initiate a separate TCP connection to a host port with TCP source port 80.
- B. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
- C. The host in EPG Client Can connect to TCP destination port 80 on the webserver in EGP Web. The webserver can initiate a separate TCP connection to a host port with TCP source port 80.
- D. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host is EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
Answer: A
NEW QUESTION 50
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right
Answer:
Explanation:
Explanation
A, B, F, D, C, E
NEW QUESTION 51
DRAG DROP
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch.
Drag and drop the configuration steps from the left into the correct order on the right.
Select and Place:
Answer:
Explanation:
Section: Compute
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/adapter-fex/6x/ b_5500_Adapter_FEX_Config_6x/b_5500_Adapter_FEX_Config_602N11_chapter_010.html
NEW QUESTION 52
The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis.
Which two SPAN characteristics must be considered? (Choose two.)
- A. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
- B. The rx/tx option is available for VLAN or VSAN SPAN sessions.
- C. A SPAN source port cannot be a destination SPAN port.
- D. Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.
- E. SPAN source ports can be monitored in multiple SPAN sessions.
Answer: A,C
Explanation:
Section: Network
NEW QUESTION 53
Which data interchange format is presented in this output?
- A. YAML
- B. JSON
- C. CSS
- D. XML
Answer: B
NEW QUESTION 54
An administrator is implementing DCNM so that events are triggered when monitored traffic exceeds the configured present utili zation threshold. The requirement is to configuration a maximum limit of 39860437 bytes that applies directly to the statistics collected as a ratio of the total link capacity. Which DCNM performance monitoring configuration parameter must be implemented to achieve this result?
- A. Per port Monitoring
- B. Baseline
- C. Utill%
- D. Absolution Values
Answer: D
NEW QUESTION 55
A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements?
- A. Define a custom user role and assign it to users
- B. Assign the user "Employee1" the network-operator role
- C. Assign users to a specific Cisco UCS locale
- D. Modify the privilege level assigned to the user
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html
NEW QUESTION 56
What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?
- A. EPLD updates are nondisruptive to traffic flow
- B. EPLD updates are installed only via the Cisco DCNM GUI
- C. EPLD packages update hardware functionality on a device
- D. EPLD bundles are released separately from a Cisco MDS NX-OS release
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.htm
NEW QUESTION 57
A network engineer configures a converged network adapter (CNA) and must associate a virtual fiber Channel
7 interface to VSAN 7. The CAN connected to the interface Eth1/7, and VLAN 700 is mapped to the VSNA.
Which configuration must be applied to create the virtual Fiber Channel interface and associate it with the Ethernet physical interface?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
NEW QUESTION 58
Refer to the exhibit.
Which statement about the default gateway configuration of the vPC is true?
- A. N7K-2 acts as the default gateway for all traffic.
- B. Either switch can act as the active default gateway.
- C. N7K-1 acts as the default gateway for all traffic.
- D. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
Answer: B
Explanation:
Section: Network
NEW QUESTION 59
Refer to the exhibit.
A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch?
- A. 192.168.254.1
- B. 239.255.70.83
- C. 192.168.254.2
- D. 192.168.254.4
Answer: D
NEW QUESTION 60
Which storage protocol reduces file locks by using leasing?
- A. SMB
- B. NFS 3
- C. NFS 4
- D. CIFS
Answer: A
Explanation:
Explanation
https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2016/pdf/BRKCOM-1211.pdf
NEW QUESTION 61
A network engineer must configure a Fibre Channel port monitoring for the local port. The source port should be monitored in the ingress direction. which configuration should be implemented to achieve this objective?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION 62
......
Master 2021 Latest The Questions CCNP Data Center and Pass 350-601 Real Exam!: https://www.vcetorrent.com/350-601-valid-vce-torrent.html
Practice To 350-601 - VCETorrent Remarkable Practice On your Implementing and Operating Cisco Data Center Core Technologies Exam: https://drive.google.com/open?id=1H0Gq2Yj_GJ_aCNl6p2zpiCao04CKzI73