Pass Your 350-601 Exam Easily With 100% Exam Passing Guarantee [2021]
350-601 Dumps are Available for Instant Access from VCETorrent
Related Certification Tracks
- Cisco Certified Specialist – Data Center Core
If you are not ready to pass the concentration test and go for CCNP Data Center, passing 350-601 will still bring you a certificate. This is Cisco Certified Specialist – Data Center Core. This title helps individuals to mark their achievement even if this is only a basic test and verify skills needed for more advanced accreditations.
- Cisco CCNP Data Center
Cisco CCNP Data Center is a professional-level certificate for those who want to prove their data center networking skills at the intermediate level. Obtaining it requires the candidates to succeed in two different exams. In this case, the combination includes a core test, basically, Cisco 350-601 and one concentration exam that can be selected out of the five options. They allow one to validate specialized skills in different areas such as designing or troubleshooting the Cisco data center infrastructure, performing the implementation of automation, setting up Cisco MDS 9000 Series switches, or utilizing Cisco application centric infrastructure. Also, having about 3-5 years of experience in the data center field is recommended.
- Cisco CCIE Data Center
Cisco CCIE Data Center is the highest attainable certificate within Cisco's comprehensive data center path. It confirms expert-level mastery of data center technologies and is the key to distinguishing yourself as a top-ranked IT nerd who gives reliable solutions. CCIE Data Center will not only confirm your ability to work with complex data center technologies but will also prepare you for a wide range of exciting roles within the same niche. To attain it, candidates must ace two tests: the above-mentioned Cisco 350-601 alongside the relevant lab exam, CCIE Data Center v3.0.
NEW QUESTION 15
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 16
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
Explanation
10.10.32.121/29 ,
10.10.32.122,
point-to-point ,
sparse-mode
NEW QUESTION 17
An engineer wants to create a backup of Cisco UCS Manager for disaster recovery purposes. What are two characteristics of a full state backup of a Cisco UCS Manager database? (Choose two.)
- A. contains all of the runtime states and statuses but not the configurations
- B. contains all of the configurations
- C. performs a complete binary dump of the databases as a sql file
- D. performs a complete binary dump of the database as a bin file
- E. performs a complete binary dump of the database as a txz file
Answer: B,D
NEW QUESTION 18
Which configuration implements static ingress replication?
- A. interface nve 1
member vni 2100980
ingress-replication protocol static
peer-ip 10.0.0.4 - B. interface nve 1
member vni 127772151
ingress-replication protocol bgp - C. interface nve 1
member vni 3126980
peervtep 10.0.0.4
ingress-replication protocol static
peer-ip 10.0.0.4 - D. interface nve 1
member vni 384233213
peer vtep 10.0.0.41
Answer: A
NEW QUESTION 19
A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the Physical connection is established?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 20
Refer to the exhibit.
Which statement about the ERSPAN configuration in this environment is true.
- A. Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.
- B. The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.
- C. Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.
- D. The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.
Answer: C
NEW QUESTION 21
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right
Answer:
Explanation:
NEW QUESTION 22
Refer to the exhibit.
What is the outcome of this command when the ELPD is updated on a Cisco Nexus 9000 series switch?
- A. upgrades the EPLD on the switch disruptively
- B. displays the compatibility of the EPLD upgrade and the image in the bootflash
- C. displays the impact of the upgrade on the operation of the switch
- D. shows a simulated upgrade of the EPLD
Answer: B
Explanation:
Explanation
NEW QUESTION 23
A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified?
(Choose two.)
- A. The license file is missing on the switch.
- B. Bootflash must contain a special directory named POAP with poap.py file.
- C. The switch is in bootup process.
- D. No startup configuration is available.
- E. No Cisco NX-OS image is present on the bootflash.
Answer: A,B
NEW QUESTION 24
What is a characteristic of electronic programmable logic device (EPLD) software upgrades?
- A. ELPD upgrades are available for fabric and power supply modules.
- B. ELPD module upgrades are nondisruptive
- C. EPLD software must be upgraded when Cisco MDS NX-OS is upgraded.
- D. EPLD software should be upgraded only when instructed by Cisco TAC
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.html
NEW QUESTION 25
A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch. In which order are components reloaded during the process?
- A. one fabric module at the time
- B. one module and one supervisor at the time
- C. all fabric modules followed by the entire switching platform
- D. all fabric modules in parallel
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/7_3/release_notes/epld/epld_rn_7x.html
NEW QUESTION 26
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 27
An engineer is implementing the Cisco ACI fabric and must create two different vPCs from leaf switches A and B.
The vPCs are deployed as follows:
* vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to server 1.
* vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server 2.
A leaf switch profile listing leaves A and B is already configured Which ACI object must be created to meet these requirements?
- A. two PortChannel interface policy groups
- B. two vPC interface policy groups
- C. one access port interface policy group
- D. one vPC interface policy group
Answer: B
NEW QUESTION 28
An engineer is enabling port security on a Cisco MDS 9000 Series Switch.
Which feature of enabling port security on a Cisco MDS 9000 Series Switch must be considered?
- A. It always learns about switches that are logging in.
- B. It binds the fabric at the switch level.
- C. It authorizes only the configured sWWN to participate in the fabric.
- D. It can be distributed by using Cisco Fabric Services.
Answer: D
Explanation:
Section: Security
NEW QUESTION 29
Which statement about monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect is true?
- A. Fibre Channel traffic can be monitored as it is encapsulated as FCoE.
- B. The destination port for monitoring must be an unassigned Fibre Channel port.
- C. The monitoring of Fibre Channel traffic is limited to the default VSAN.
- D. Fibre Channel traffic can be monitored only on one vHBA per server.
Answer: B
NEW QUESTION 30
A network engineer must create an EEM script that saves a copy of the running configuration on bootflash and writes a message to syslog when a user saves the configuration to a Cisco Nexus switch. Which configuration set should be applied to complete this task?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
Explanation:
The command write memory is not valid in NX-OS
The "event-default"
NEW QUESTION 31
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The timeout value on the TACACS+ server is 10 seconds.
- B. The TACACS+ server uses the type-6 encrypted format.
- C. The switch queries the TACACS+ server by using a clear text PAP login.
- D. The switch queries the TACACS+ server by using an encrypted text PAP login.
Answer: C
NEW QUESTION 32
Drag and drop the storage technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 33
Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal?
- A. Generate a new default key ring certificate from the Cisco UCS Manager
- B. Regenerate the default key ring certificate manually
- C. Reboot the SSO component of the Cisco UCS Manager
- D. Reinstall the cluster to generate the default key ring certificate
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem
NEW QUESTION 34
DRAG DROP
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.
Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Select and Place:
Answer:
Explanation:
Section: Network
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/112213-netflow- nexus7000-nsox-configex.html
NEW QUESTION 35
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
NEW QUESTION 36
......
The Cisco 350-601 exam, commonly known as Implementing and Operating Cisco Data Center Core Technologies is a popular choice for the CCNP Data Center, CCIE Data Center, and Cisco Certified Specialist-Data Center Core certifications. This test proves that a learner has sufficient knowledge to implement core data center technologies such as storage network, compute, network, security, and automation. It is the ace up your sleeve when you want to qualify for exciting IT roles in network designing, network administration, network engineering, systems engineering, data center engineering, consulting systems engineering, field engineering, and technical solutions architecture.
Study resources for the Valid 350-601 Braindumps: https://www.vcetorrent.com/350-601-valid-vce-torrent.html
Latest CCNP Data Center 350-601 Actual Free Exam Questions: https://drive.google.com/open?id=17LxmxyqNtTgApl3PUjxsr9uJlyD4z5MD